On 8/16/10 2:59 PM, Paul M. Hill wrote:
13:57:23 unknown: Send SysInfo2(id=1019d7f0) row = 0, comm = ********, ver
SNMPv2c
13:57:30 unknown: Send SysInfo2(id=1019d7f1) row = 0, comm = ********, ver
SNMPv2c
13:57:37 unknown: Send ICMP Echo(id=1019d7f2) row = 0, comm = ********, ver
SNMPv2c
13:57:38 unknown: AT/IP Echo Reply [DONE]
13:57:45 63.175.186.14: Send SysInfo2(id=1019d870) row = 0, comm = ********,
ver SNMPv1
13:57:50 63.175.186.14: Send SysInfo2(id=1019d871) row = 0, comm = ********,
ver SNMPv1
13:57:55 63.175.186.14: Send ICMP Echo(id=1019d872) row = 0, comm = ********,
ver SNMPv1
13:57:55 63.175.186.14: AT/IP Echo Reply [DONE]
I'm guessing that the device named "unknown" and 63.175.186.14 are the
devices in question. "unknown" is using SNMPv2c and 63.175.186.14 is
using SNMPv1.
Try an SNMPWalk for "1.3" on both devices. SNMPWalk will only send a
single variable in the SNMP request. Select the device and choose
SNMPWalk... from the Monitor menu.
--
Bill Fisher
Dartware, LLC
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [email protected]
