Hi Bill: One map that I have been revisiting is our 1st floor Learning Commons map. I have confirmed now that all 15 devices are set to resolve to " Resolve name to update address ". I will let you know if I have to revisit it again to change the "resolve to" addressing.
Randy > -----Original Message----- > From: [email protected] [mailto:InterMapper- > [email protected]] On Behalf Of Bill Fisher > Sent: Friday, April 15, 2011 10:28 AM > To: [email protected]; intermapper- > [email protected] > Subject: [IM-Talk] Re: Setting Address Behaviour > > > > rbaker wrote: > > I am trying to set the name of a device to update the address. After a > while, the "Resolve name to update address" field is empty and the "Resolve > address to update name" option is selected and populated with an IP > address. > > > > > Once you've set the "resolve" setting in the Set Address... dialog, the > setting > should stick. > > When you add a device (or it is added via auto-discovery), the "resolve" > setting defaults to "resolve address to update name", and you must visit the > Set Address... dialog to change it to "Resolve name to update address". After > that one change, the setting will stick. > > If you are using the Set Address dialog to change the setting and you find > that it still changes back, please let me know -- the software is not > supposed > to do that. > > > -------------------- m2f -------------------- > > Read this topic online here: > http://forums.dartware.com/viewtopic.php?p=3361#3361 > > > > > > __________________________________________________________ > __________ > List archives: > http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ > To unsubscribe: send email to: [email protected] > > > -- > This message was scanned by the Georgian College ESVA and is believed to > be clean. ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [email protected]
