Hey Group, Took a look at the WMI System Information probe today. But first, when using the basic SNMP Traffic probe against my workstation at work, the Response time is reported as 13 msec.
If I change the probe to WMI System Information, the Response time now reports as 2421 msec and the icon is yellow. The information collected under System, Processor, Disk, Operating System and Net is cool. But the response time report is way off. I'm on a 1 gig connection on the same network as the IM Server but one switch away on fibre, 1 gig. If I switch back to ordinary SNMP Traffic it goes immediately back to 13 msec +/- What's up with this probe? What's really interesting is if I make a probe group with the 2 probes, 1 says 13 msec and the other 2421 msec (or whatever) - for the same destination! Better to have both probes agree but failing that in the short term ... can the WMI vb script for SysInfo be edited to not report the response time? regards, Kevin Wigle ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [email protected]
