Hi there,
just following the wish-list discussion and also wanted to put my request here.
I asked a lot of times for a new feature but it isn't implemented yet.
So I wanted to know if I'm the only one who needs this:
I like to see a more granularly way to acknowledge interfaces.
It should be possible to do this the same way as a device
e.g. in the interface list of a device it should be a possibility to
acknowledge an interface the following ways
1. ignore outages at all / always ack (like ignore outages ack for
devices itself)
2. "normal" ack (the one already working)
3. timed ack
Here is why I like to see this:
I monitor a lot of cisco switches and their interfaces.
Every time a switchport goes down because a device (sensible clients) on such a
port goes down (rebooting or shut down during night or holiday) the
switch goes in a warning state.
If I can use a "Ignore outages" flag on interface level everything would be
much better.
At now I have to hide all these interfaces to get a "green" state for the
switch.
The timed ack would be nice for maintenance of servers connected to a switch.
At now you always have to check all the maps not in "green" status.
Greetings from sunny but cold Germany
Jürgen____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [email protected]
