Hi Pat,
> We recently noticed that the cheap HP 1800 series switches that we use in
> several locations stopped displaying interfaces, even though the SNMP Traffic
> probe appears to otherwise look normal. When I open the switch interface
> window, I only see an entry for "IP Interface". I have tried
> checking/unchecking the "Display unnumbered interfaces", but no interfaces
> actually show up.
>
> I don't have an old copy of IM laying around for testing, but I think the
> problem started with the 5.6 release.
>
> Anybody else seen this?
I happen to have one of those switches (HP 1800-8G, model J9029A). It operates
normally: I see the interfaces, traffic ants move, etc.
I'm curious what you see if you switch to using the SNMP/Table Viewer probe.
Its status window will have links to display a number of tables:
- ifTable
- ifXTable
- Traffic counters
- tcpConnTable
- udpTable
- ipAddrTable
- ipRouteTable
- ip Forwarding Table
- CIDR Route Table
- ipNetToMediaTable (ARP table)
- Bridge-MIB table
Do you see what you would expect in these tables? Thanks.
Rich
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: intermapper-talk-...@list.dartware.com
