Hi,
A co-worker and I have been working on some intensive timestamp/timezone
manipulation code for the past week or so, and ran across what we believed
to be a bug in the way PHP handled gmmktime(). Browsing through the code,
sure enough I found the source of the problem. I fixed it, and have
attached a patch.
As I was searching around, I discovered that this has been an open bug
since 4.0.6 (2 years!). I believe that this patch should fix most of the
issues related to the following problem:
http://bugs.php.net/bug.php?id=14391
The Problem:
============
The function gmmktime() is supposed to take a date in GMT as a paramter
and return a timestamp in GMT. No manipulation of the time should occur.
The only circumstance in which manipulation of the time should happen is
if the seventh parameter (is_dst) is set to 1. This is the expected
behavior. However, in reality I noticed that when I didn't specify a
seventh parameter, it was applying a daylight savings time offset when I
tried to get the epoch. See the example code.
<?php
// Get a timestamp for the epoch (jan 1, 1970)
echo "<pre>";
echo gmmktime(0,0,0,1,1,1970,1)."\n";
echo gmmktime(0,0,0,1,1,1970,0)."\n";
echo gmmktime(0,0,0,1,1,1970)."\n";
// Now get timestamp for June 1
echo "\n";
echo gmmktime(0,0,0,6,1,1970,1)."\n";
echo gmmktime(0,0,0,6,1,1970,0)."\n";
echo gmmktime(0,0,0,6,1,1970)."\n";
?>
I expected the first set of outputs to look like this:
-3600
0
0
Which it does, so this is fine. However, The second block of outputs is
in June which if I had been using simply mktime(), I would have expected a
DST offset (note: DST = daylight savings time) to be applied by default
(on the 3rd command). However, since I'm using gmmktime() by default no
DST offset should be applied. The odd behavior manifests itself in the
second block of output:
13046400
13050000
13046400
This is pretty meaningless until you realize what is actually going on.
The last output, which is generated by a gmmktime() that has no 7th
parameter, is applying an offset for daylight savings time.
The Solution
============
I had a moment of panic and was sincerely hoping that GMT did not actually
use daylight savings time, so I did some research and found that while the
timezone that contains Greenwich actually does use daylight savings time,
the GMT standard time reference does not. So right there I knew something
was wrong on the PHP side. I loaded up the source of PHP (like a good
open source enthusiast), and sure enough, I discovered the source of the
problem (no pun intended).
PHP is using the C function php_mktime() for both mktime() and gmmktime().
There is a flag as a parameter called "gm" which is 1 or 0 depending on
whether it was called from mktime() or gmmktime(). The problem is that
there is no check before applying the server's daylight savings
information to the timestamp.
As a fix for this, I changed the behavior so that by default if there is
no 7th parameter for gmmktime, it will not apply any DST offset. This
differs from mktime which by default will appy the server's DST offset.
I have attached patches for both PHP php-5.0.0b1 and php-4.3.2. I would
imagine the same code would work on most recent versions of PHP as it
doesn't seem that this function has had much recent development. The
patch can be applied by using the following:
$ cd /usr/local/php-4.3.2
$ patch -p2 < ~/gmmktime-php_4.3.2.patch
Feel free to contact me if you have any questions.
Luke
--
Luke Ehresman
luke[at]ehresman.org
http://www.luke.ehresman.org
diff -u clean/php-4.3.2/ext/standard/datetime.c php-4.3.2/ext/standard/datetime.c
--- clean/php-4.3.2/ext/standard/datetime.c 2003-05-04 07:22:00.000000000 -0400
+++ php-4.3.2/ext/standard/datetime.c 2003-08-18 17:18:19.000000000 -0400
@@ -116,7 +116,20 @@
/* Let DST be unknown. mktime() should compute the right value
** and behave correctly. Unless the user overrides this.
*/
- ta->tm_isdst = -1;
+ /*
+ ** If we are using gmmktime(), do not use the local
+ ** server's setting of DST. GMT does not use daylight
+ ** savings, so unless the user overrides us, this should
+ ** be set to 0.
+ ** - Luke Ehresman, Aug 2003, <[EMAIL PROTECTED]>
+ */
+ if (gm) {
+ ta->tm_isdst = 0;
+ is_dst = 0;
+ } else {
+ ta->tm_isdst = -1;
+ is_dst = -1;
+ }
/*
** Now change date values with supplied parameters.
Common subdirectories: clean/php-4.3.2/ext/standard/tests and
php-4.3.2/ext/standard/tests
--- php-5.0.0b1/ext/standard/bak 2003-08-18 17:30:31.000000000 -0400
+++ php-5.0.0b1/ext/standard/datetime.c 2003-08-18 17:30:48.000000000 -0400
@@ -112,7 +112,20 @@
/* Let DST be unknown. mktime() should compute the right value
** and behave correctly. Unless the user overrides this.
*/
- ta->tm_isdst = -1;
+ /*
+ ** If we are using gmmktime(), do not use the local
+ ** server's setting of DST. GMT does not use daylight
+ ** savings, so unless the user overrides us, this should
+ ** be set to 0.
+ ** - Luke Ehresman, Aug 2003, <[EMAIL PROTECTED]>
+ */
+ if (gm) {
+ ta->tm_isdst = 0;
+ is_dst = 0;
+ } else {
+ ta->tm_isdst = -1;
+ is_dst = -1;
+ }
/*
** Now change date values with supplied parameters.
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
