John
The compiler is broken in versions of 5.0.x
or more precisly how it works out what to compile and in what order
I have just spent the last 30 minutes compiling to get over the same
message that you reported
I find that the only way at the moment is to
do $System.CompileAll("kyrb")
but on a real app loaded with a fair number of classes it's taking 8
minutes every time:{
also you get spurious errors with non-existent csp pages hanging
around
and it's a real pain
Peter
oh and where is the .err parameter in
do $System.CSP.LoadPageDir(dir,flags,.ERR)
cannot even go and make a coffee - reports a non-existent error but
it's scrolled off the screen buffer so am not sure if the error is
real or not
!
BTW no 2
the compile flags used when the page auto compiles are "kru-lo3"
so the following seems to behave better
d $System.CSP.LoadPageDir("/bhdta","kru-lo3")
And u guessed it I logged this around 3 weeks ago
On Mon, 23 Aug 2004 11:10:14 +0100, John Murray
<[EMAIL PROTECTED]> wrote:
>For the benefit of the NG, here's info about a problem I recently logged
>with WRC while preparing a new Cache 5 demo kit of VC/m, our version
>control product. It's been confirmed as a bug, fixed in 5.1. I'm waiting
>to hear if it'll be back-ported to a 5.0.x release.
>
>I hope the info may prove useful to someone.
>
>Regards,
>
>John Murray
>George James Software
>www.georgejames.com <http://www.georgejames.com>
>VC/m - the force of change
>---
>
>I created six new copies of mgr/samples/CACHE.DAT and the csp/samples
>tree. Their namespaces
>are:
>
>VCMDEMO-DEV1
>VCMDEMO-DEV2
>VCMDEMO-PATCHDEV
>VCMDEMO-PATCHTEST
>VCMDEMO-PROD
>VCMDEMO-TEST
>
>Their CSP app dirs are /csp/vcmdemo/samples/dev1, dev2 etc.
>
>My test routine in USER is as follows:
>YJMtest ;
> k ns
> s ns("VCMDEMO-DEV1")="dev1"
> s ns("VCMDEMO-DEV2")="dev2"
> s ns("VCMDEMO-PATCHDEV")="patchdev"
> s ns("VCMDEMO-PATCHTEST")="patchtest"
> s ns("VCMDEMO-PROD")="prod"
> s ns("VCMDEMO-TEST")="test"
> s ns=""
> f s ns=$o(ns(ns)) q:ns="" d
> . zn ns
> . w !!,$zu(5)
> . d
> . . w !,"LoadPageDir"
> . . s
>ok=$system.CSP.LoadPageDir("/csp/vcmdemo/samples/"_ns(ns),"-d")
> . . i ok w ":OK"
> . . e w ": Failed - ",ok
> zn "USER"
> q
>
>I start a new terminal in USER and run it once. The output is:
>USER>d ^YJMtest
>
>
>VCMDEMO-DEV1
>LoadPageDir:OK
>
>VCMDEMO-DEV2
>LoadPageDir:OK
>
>VCMDEMO-PATCHDEV
>LoadPageDir:OK
>
>VCMDEMO-PATCHTEST
>LoadPageDir:OK
>
>VCMDEMO-PROD
>LoadPageDir:OK
>
>VCMDEMO-TEST
>LoadPageDir:OK
>USER>
>
>Now I run it again in the same terminal:
>USER>d ^YJMtest
>
>
>VCMDEMO-DEV1
>LoadPageDir:OK
>
>VCMDEMO-DEV2
>LoadPageDir: Failed - 0 *�"<CLASS EDITED>tag+48^%cspCompile
>
>VCMDEMO-PATCHDEV
>LoadPageDir:OK
>
>VCMDEMO-PATCHTEST
>LoadPageDir: Failed - 0 *�"<CLASS EDITED>tag+48^%cspCompile
>
>VCMDEMO-PROD
>LoadPageDir:OK
>
>VCMDEMO-TEST
>LoadPageDir:OK
>USER>
>
>Next I start a fresh terminal. There, the first run of YJMtest is OK and
>the second run gives the
>same errors as in the original terminal.
>
>Third and subsequent runs give the same result.
>
>However, in a fresh terminal, twelve consecutive runs of the following
>command produced no
>failures:
>VCMDEMO-DEV2>w
>!,$system.CSP.LoadPageDir("/csp/vcmdemo/samples/dev2","-d")
>
>After that, the first run of YJMtest from user was OK, but the
>subsequent runs produced <CLASS
>EDITED> errors though not always on the same namespaces.
>
>
>Then I augmented my YJMtest routine to do an OBJ.CompileAll and a
>CSP.LoadRuleDir as well. Now I get
><CLASS EDITED> on the first pass and also <INTERNAL OBJECT ERROR> on the
>second:
>
>USER>d ^YJMtest
>
>
>VCMDEMO-DEV1
>CompileAll:OK
>LoadRuleDir:OK
>LoadPageDir:OK
>
>VCMDEMO-DEV2
>CompileAll:OK
>LoadRuleDir:OK
>LoadPageDir: Failed - 0 *�"<CLASS EDITED>tag+48^%cspCompile
>
>VCMDEMO-PATCHDEV
>CompileAll:OK
>LoadRuleDir:OK
>LoadPageDir: Failed - 0 *�"<CLASS EDITED>tag+48^%cspCompile
>
>VCMDEMO-PATCHTEST
>CompileAll:OK
>LoadRuleDir:OK
>LoadPageDir: Failed - 0 *�"<CLASS EDITED>tag+48^%cspCompile
>
>VCMDEMO-PROD
>CompileAll:OK
>LoadRuleDir:OK
>LoadPageDir: Failed - 0 *�"<CLASS EDITED>tag+48^%cspCompile
>
>VCMDEMO-TEST
>CompileAll:OK
>LoadRuleDir:OK
>LoadPageDir: Failed - 0 *�"<CLASS EDITED>tag+48^%cspCompile
>USER>d ^YJMtest
>
>
>VCMDEMO-DEV1
>CompileAll:OK
>LoadRuleDir:OK
>LoadPageDir:OK
>
>VCMDEMO-DEV2
>CompileAll: Failed - 0 C�9<INTERNAL OBJECT
>ERROR>LockClassesRecursive+10^%occ
>Lock
>LoadRuleDir: Failed - 0 8�0<INTERNAL OBJECT
>ERROR>LockOneClass+6^%occLock
>LoadPageDir: Failed - 0 *�"<CLASS EDITED>tag+48^%cspCompile
>
>VCMDEMO-PATCHDEV
>CompileAll: Failed - 0 C�9<INTERNAL OBJECT
>ERROR>LockClassesRecursive+10^%occ
>Lock
>LoadRuleDir: Failed - 0 8�0<INTERNAL OBJECT
>ERROR>LockOneClass+6^%occLock
>LoadPageDir: Failed - 0 *�"<CLASS EDITED>tag+48^%cspCompile
>
>VCMDEMO-PATCHTEST
>CompileAll: Failed - 0 C�9<INTERNAL OBJECT
>ERROR>LockClassesRecursive+10^%occ
>Lock
>LoadRuleDir: Failed - 0 8�0<INTERNAL OBJECT
>ERROR>LockOneClass+6^%occLock
>LoadPageDir: Failed - 0 *�"<CLASS EDITED>tag+48^%cspCompile
>
>VCMDEMO-PROD
>CompileAll: Failed - 0 C�9<INTERNAL OBJECT
>ERROR>LockClassesRecursive+10^%occ
>Lock
>LoadRuleDir: Failed - 0 8�0<INTERNAL OBJECT
>ERROR>LockOneClass+6^%occLock
>LoadPageDir: Failed - 0 *�"<CLASS EDITED>tag+48^%cspCompile
>
>VCMDEMO-TEST
>CompileAll: Failed - 0 C�9<INTERNAL OBJECT
>ERROR>LockClassesRecursive+10^%occ
>Lock
>LoadRuleDir: Failed - 0 8�0<INTERNAL OBJECT
>ERROR>LockOneClass+6^%occLock
>LoadPageDir: Failed - 0 *�"<CLASS EDITED>tag+48^%cspCompile
>USER>
