Shouldn't be possible on a 3S LiPo (fully charged should be about 12.6V), but until you figure out what's wrong (wrong battery? wrong measurement?), do not connect the IOIO to this. When you do, make sure to use as short as possible wiring between the battery and the IOIO, to avoid risk of frying the IOIO VREG.
On Wed, Dec 18, 2013 at 4:52 AM, Marius Vosylius <[email protected]>wrote: > I have purchased new LiPo Battery for my IOIO, and just by mistake I have > checked Voltage of battery and its shows me 24.4?!!! Is this is possible if > battery only 11.1 V. > > > http://www.seeedstudio.com/depot/polymer-lithium-ion-battery-2200mah-111v-p-1513.html?cPath=1 > Link For Battery. > > Now Im afraid to connect it to my IOIO Board. > > Any recommendations? > > -- > You received this message because you are subscribed to the Google Groups > "ioio-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/groups/opt_out. > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/groups/opt_out.
