It seems I've been chasing problems all day. The first problem was the IOIO working fine for my Nexus 7 tablet with Android 4.4, but not working for my Note 3 device with Android 4.3. I made sure debugging was turned off and ran the exact same apk on each device. I still don't know what is up with that. The next problem seemed to be hardware related. If I tried to do an ADC on pin 30, my program would freeze. I was converting 3 different signals, and tried using pins 30, 31, and 32. It never worked. When I tried using pins 40, 41, and 42, everything worked fine. When I tried using pins 31,32, and 33, I could move one potentiometer and it would affect one of the other channels that had a constant voltage on it. None of it made any sense to me. After experimenting around with the different pins, the red light on the board went out and I could no longer connect to it. I know the LED still works because I attempted reloading the firmware and the red and yellow lights behaved as expected. Anybody have any ideas what was going on with all of this? Anything I can test or do I accept this is a bad board now?
-- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/groups/opt_out.
