Hey Gino. Sorry to bother you. I had the same problem. when i typed as you did, same ioexception appeared. D:\IOIOdude>ioiodude --port=COM9 --reset write App-IOIO0400.ioioapp Caught IOException. Exiting. I'm wondering where to put the ioioapp file?? in the ioiodude folder?? or it will detect automatically?? Thank you.
On Monday, July 15, 2013 9:38:10 PM UTC+9, gino wrote: > > Hello, > > I have a working IOIO app and a fried IOIO-OTG (just connecting it to > power, after about 10 seconds the micricintroller chip is too hot to even > touch, not sure how that happened). > Anyway, I got a new IOIO-OTG that is now not recognized by my app - > BaseIOIOLooper.setup() is never called. It is, however, recognized in IOIO > hardware app with the following output: > Android Version: 4.2.1 > IOIO Hardware: SPRK0020 > IOIO Bootloader: IOIO0400 > IOIO Firmware: IOIO0330 > > Yellow LED can be turned on and off in the app. > > If I remember correctly, though the new IOIO does seem to have now the > latest bootloader, I had the same problem with the old one and burning a > new bootloader solved it. > > But I can't burn the bootloader: > I shortened the boot pin and connected to my PC, disconnected the short, > got the flashing LED, installed drivers and then got the following: > > D:\IOIOdude>ioiodude --port=COM9 versions > IOIO Bootloader detected. > > Hardware version: SPRK0020 > Bootloader version: IOIO0400 > Platform version: IOIO0030 > > D:\IOIOdude>ioiodude --port=COM9 --reset write App-IOIO0400.ioioapp > Caught IOException. Exiting. > > > Why does my app not recognize the phone? Why the IOException? > > Thanks, > Gal > > > > > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/groups/opt_out.
