Just flip the direction of the USB cable ("A" side is always the host).
On Feb 24, 2014 4:24 AM, <[email protected]> wrote:> Hi Ytai， > > I am afraid I need your help. :) > > I compiled the firmware myself with the firmware source code. > (I modified the program start address to get away of bootloader part. > because in this way, I can debug step by step) > > When I connected the IOIO board running my firmware with my > samsung S3. It is recognized as CDC mode, not Openaccesory. (on S3, I > disabled the ADB) I am wondering how to make the USB interface recognized > as open accessory. I noticed some macro are related with USB mode. I am not > sure whether I should do some macro setting to make it work. On S3, I have > developed a test app to test with ioio board. It works fine with the hex > file of DevBoot-IOIO0401-App-IOIO0500. > > Thanks. > Regards, > Jim > > -- > You received this message because you are subscribed to the Google Groups > "ioio-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/groups/opt_out. > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/groups/opt_out.
