I don't understand the question exactly - what are you expecting to find when probing those pins? They are not supposed to generate any output unless you're connected to a programmer. Your IOIO seems to be running the latest app firmware (the bootloader can be upgraded to v4.01, but there is very little reason to do so).
On Tue, Feb 25, 2014 at 3:44 AM, Chiong Ching Lai <[email protected]>wrote: > Hi, > > The page > https://github.com/ytai/ioio/wiki/Getting-To-Know-The-IOIO-OTG-Board > > says that the ICSP pins are: > MCLR: mclr > PGC: 31, 35 or 37 > PGD: 32, 36 or 38 > > When i probe the signal on a scope, it seems to me that > MCLR: 36 > PGC: 37 > PGD: 38 > > and the other pins do not give any response (always high). My IOIO OTG > details are: > Hardware version: SPRK0020 > IOIO bootloader: IOIO0400 > IOIO firmware: IOIO0500 > IOIO library: IOIO0503 > > Can anyone please confirm? Thank you. > > -- > You received this message because you are subscribed to the Google Groups > "ioio-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/groups/opt_out. > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/groups/opt_out.
