You need to: 1. Power off the IOIO. 2. Bridge boot to GND. 3. Connect the IOIO to the PC. The yellow LED should be on. 4. Remove the bridge. The LED should blink a few times, then turn off. 5. Now the IOIO should be correctly identified.
Is that what you did? On Mar 24, 2014 11:56 AM, "Juan David Bolanos Aguilar" <[email protected]> wrote: > > 1. IOIO connected but not in bootloader > mode<https://lh3.googleusercontent.com/-IlEoTP49bRU/UzB_a2jrfnI/AAAAAAAABCY/Pw3swzoSRqE/s1600/Captura+de+pantalla+de+2014-03-24+13%3A47%3A28.png> > > 2. Now I put the IOIO in bootloader mode (Yellow led blinks as usual) but > dissappear from /dev > > <https://lh5.googleusercontent.com/-kBP5AZF3HQA/UzB_Xjtua0I/AAAAAAAABCQ/_q1fKr75cK0/s1600/Captura+de+pantalla+de+2014-03-24+13%3A49%3A14.png> > Yes I was trying to flash my IOIO But I cannot update it because when I > made the bridge between GND and boot the yellow led starts to blink (as > usual) but my board dissapear from /dev directory and therefore I can't use > the IOIODude app > > > El lunes, 24 de marzo de 2014 02:38:29 UTC-5, Ytai escribió: >> >> Everything's fine since you're getting the accessory dialog. >> Best chances are that you have a software / firmware mismatch (see the >> logcat output). >> I recommend you to upgrade your firmware to the latest (v5.00) and use >> the corresponding software bundle (v5.03). >> >> >> On Sun, Mar 23, 2014 at 11:35 PM, Juan David Bolanos Aguilar < >> [email protected]> wrote: >> >>> Hello >>> >>> I purchased a IOIO-OTG from sparkfun and loaded the helloIOIO example on >>> it, everything seems fine but when I connect the phone with my IOIO the >>> yellow led doesn't start. >>> >>> What Can I do? Im very dissapointed >>> >>> >>> >>> <https://lh6.googleusercontent.com/-WWUeYadaKB4/Uy_R_3B31yI/AAAAAAAABBY/vdqYfONCjKU/s1600/Screenshot_2014-03-24-01-25-00.png><https://lh3.googleusercontent.com/-fuqKenD9244/Uy_SHriN6JI/AAAAAAAABBg/mRqmMj41EOc/s1600/Screenshot_2014-03-24-01-25-30.png> >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "ioio-users" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To post to this group, send email to [email protected]. >>> Visit this group at http://groups.google.com/group/ioio-users. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> > -- > You received this message because you are subscribed to the Google Groups > "ioio-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
