Problem solved.... COM27 does the trick.... I misread the doc.... ioiodude --port=COM<number> versions ioiodude --port=<your_port> --reset write <new_firmware>.ioioapp
changing that to the following may be less misleading.... :) ioiodude --port=COM<number> --reset write <new_firmware>.ioioapp On Saturday, April 26, 2014 11:25:58 PM UTC-7, [email protected] wrote: > > I tried configuration wipe & the device is into bootloader mode. (yellow > LED blinked few time and stop) I still can't program the firmware because > none of the following commands work. > > c:\fw> ioiodude --port=27 versions > c:\fw> ioiodude --port=27 --reset write App-IOIO0500.ioioapp > > I double checked the port is on 27. Any other suggestion? > > > On Saturday, April 26, 2014 7:40:49 PM UTC-7, Ytai wrote: >> >> You shouldn't be able to brick the bootloader even if you install >> complete garbage using it. You should try to boot into bootloader mode and >> reinstall the firmware. You may need to follow the configuration wipe >> procedure. Make sure you use the latest IOIODude. >> On Apr 26, 2014 7:26 PM, <[email protected]> wrote: >> >>> It seems like my problem is fixed when I connected IOIO back to a Win7 >>> host machine. My other problem is IOIO got stuck when I execute the >>> following command. Any one else seeing similar problem? Any suggestion >>> would be great because I really want to get the application firmware >>> upgrade. >>> >>> c:\fw> ioiodude --port=27 --reset write App-IOIO0500.ioioapp >>> >>> thanks, >>> -Ken >>> >>> On Saturday, April 26, 2014 7:01:30 PM UTC-7, [email protected] wrote: >>>> >>>> I accidentally bricked my IOIO-OTG during the process of upgrading the >>>> application firmware. Everything went well until I used the hex file >>>> instead of .ioioapp file. >>>> >>>> c:\fw> ioiodude --port=27 --reset write SPRK0020.hex >>>> >>>> My ioio keep blinking since then and won't talk to my android device >>>> anymore. I have another IOIO-OTG, and wondering can the same programmer >>>> procedure for IOIO V1 be used on IOIO-OTG? Or I have to use PICKIT3? >>>> Just >>>> want to check before risking my other IOIO-OTG. >>>> >>>> thanks >>>> -Ken >>>> >>>> >>>> >>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "ioio-users" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To post to this group, send email to [email protected]. >>> Visit this group at http://groups.google.com/group/ioio-users. >>> For more options, visit https://groups.google.com/d/optout. >>> >> -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
