Thanks Ytai for the info. I'll give it a try and I'll post any progress that I make in this group.
Regards, Lorne Wilkins On Monday, April 28, 2014 6:29:36 PM UTC-4, lornetw wrote: > > Hi. I am building a 3D printer (a derivative of Bukito) and I would like > to use my IOIO-OTG board for testing my NEMA 17 steppers (among other > things). I have done quite a bit of research trying to find an example of > how to hook things up (wiring and some simple code) and I haven't found too > much of anything specific to the IOIO. I would appreciate it if someone > could let me know if they have done anything similar. > > I will be buying the following equipment : > > NEMA 17 steppers : http://openbuildspartstore.com/nema-17-stepper-motor/ > > Stepper driver board : > http://www.ebay.ca/itm/130756974410?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649 > (already bought one) > > Info on a similar board : > http://www.allelectronics.com/mas_assets/theme/allelectronics/spec/SMC-5.pdf > > Ideally, I would like to make my test program with BASIC4Android (with the > new V2 motor control library) because I am somewhat familiar with that > because I make Android apps for my CNC machinist students. But if I could > get a better idea of the actual hookup of where each wire goes I should be > able to figure out the rest myself. I would also like to get my hands on an > example of whatever code you have used so I know which pins and calls you > used. > > Would appreciate any help I can get, > > Regards > > Lorne Wilkins > > > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
