Your old IOIO indeed seems dead (fried switcher most likely). If you're seeing a fast blink it means that it has not been calibrated. Connect it to a PC to fix it. This should have been done at the factory, who did you but this from? On May 20, 2014 11:42 AM, "Ann Lee Watson" <[email protected]> wrote:
> Hello, seems I fried my IOIO (the model before OTG) due to using 16v > -chinese adaptor "said" 12v- > (now it does not send USB signal even with the little white screw to the > max and you can fry eggs on its processor). > It worked for the few test I did with the App I developed... > > > so now... > > I just connected usb and a good 12v/1000mA to a brand new IOIO OTG when > its *yellow LED blinks forever and sends no signal to smartphone *(the > little white screw is to the max as well) > > please, confirm my old IOIO is dead and how to fix this in the IOIO OTG? > > thanks in advance! > > > -- > You received this message because you are subscribed to the Google Groups > "ioio-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
