Hello, I wanted to update my IOIO-OTG from FW 3.30 to the newest one.
I followed the instructions for IOIODude and have to say that this is very well documented here<https://github.com/ytai/ioio/wiki/IOIO-OTG-Bootloader-and-IOIODude> I also failed to get IOIODude working in the bootloader mode under Xubuntu 14.04, as described already several times. Command hangs when I try this ./ioiodude --port=/dev/ttyACM0 versions Normal mode works and the device shows up as /dev/IOIO0 and /dev/ttyACM0. So I used my windows PC. Hardware wizard found the device, I will use COM44 for my IOIO-OTG. I should exectute the following command now: ioiodude --port=COM44 --reset write IOIO0503.ioioapp However, I downloaded App-IOIO0503.zip<https://github.com/ytai/ioio/raw/master/release/software/App-IOIO0503.zip>from the download page, unzipped it and tried to find the advised .ioioapp, but couldn't find it in the package. So, where is it ? best regards Schnee -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
