Does it work with a PC? Does it work with an Android when you set the host mode switch to "H"? Have you verified that the trim-pot is all the way clockwise?
On Tue, May 27, 2014 at 7:00 AM, Pierre P <[email protected]> wrote: > Hi, > > I have recently weld some wire on VIN PIN and GND PIN, and now my tablet > don't recognize the USB connection. The PWR Led is red as usual, nothing is > hot(except maybe under the usb connector on the board, but it's like 40°C > maximum) or seems broken/burn, so is it possible that the USB socket is > destroy ? > > How can I test (I plan to try with another phone) to be sure if the USB > is dead or burn, or it's just a little part inside the usb connector ? Or > maybe it's the board ? How can I be sure of that ? > > My apps use Open Accessory, and I didn't have any bluetooth dongle > > Sorry for this strange question, but that's not mine IOIO-OTG and I will > feel very bad if I have burn this one... > > Thanks for the future response ! > > > > PS : here <http://hpics.li/8500bff> is a picture of where I sold my wire > > -- > You received this message because you are subscribed to the Google Groups > "ioio-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
