Thank you very much ytai! On Wednesday, May 28, 2014 5:58:20 PM UTC+2, Ytai wrote: > > PulseInput is what you want to use. This module limiting the bandwidth to > up to 200 messages per second from the IOIO to the Android regardless of > how fast the pulses are. > The Pulse Input page on the Wiki and the Javadocs should have detailed > explanations. > > > On Tue, May 27, 2014 at 6:33 AM, siqi wang <[email protected] > <javascript:>> wrote: > >> Hello everyone, >> >> Now I am working on measuring the speed of a robot car which is connected >> with Android through IOIO. As i have 2 speed sensors on the car wheels, the >> pulses will be sent from the sensors when the wheel roll. The question is >> that if I use the PulseInput functions, will all pulses from the sensor >> pass to the Android device? As IOIO is connected with Android by USB/OTG >> cable, I am scared of the damages on the cable caused by high frequency >> pulses. If the pulses pass only to the IOIO card and IOIO send only the >> datas(i.e. the average frequency of pulses) to Android, that would be fine. >> Is there anyone who can tell me? Thank you very much! >> >> SIqi >> >> -- >> You received this message because you are subscribed to the Google Groups >> "ioio-users" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> >> To post to this group, send email to [email protected] >> <javascript:>. >> Visit this group at http://groups.google.com/group/ioio-users. >> For more options, visit https://groups.google.com/d/optout. >> > >
-- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
