It had been discussed several times recently. It is not clear what's causing it, but it is specific to Linux / bootloader. Use Windows/OSX for the upgrade process. Otherwise, the IOIO application firmware works fine with Linux. On Jun 3, 2014 6:43 AM, "M.A.K" <[email protected]> wrote:
> Dears , I'm try to upgrade the firmwork to 500 , when I connect the board > to computer in normal mode every thing is fine , but in BootLoader mode I > got the stat blinking but the computer can't see the IOIO board in > /dev/IOIO directory .following my IOIO details in Normal mode > > > X102BA IOIODude-0101 # ./ioiodude --port=/dev/IOIO0 versions > IOIO Application detected. > > Hardware version: SPRK0020 > Bootloader version: IOIO0400 > Application version: IOIO0330 > > -- > You received this message because you are subscribed to the Google Groups > "ioio-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
