Hey there. So I recently purchased an IOIO-OTG board from Sparkfun along with a bluetooth adapter and a string of Android addressable LEDs.
I wired up a USB cable by stripping the ground and power cables and then soldered them to the board to the GND and VIN ports respectively. I plugged this into a USB power source. From there I took the USB OTG dongle and plugged my phone (HTC One M8 running 4.4.2) via micro USB. My issue comes in when I try to use Hello IOIO or IOIO Hardware Tester to verify connection. It doesn't detect it. I also tried it with the Bluetooth dongle and my phone does not find the dongle. I tried plugging the board directly into my PC and tried using IOIODude but it does not connect either. Under Device Manager it shows it as IOIO-OTG(COM8) but it has a troubleshooting issue of "Device Will Not Power On" I can get the stat light to show if I power the board and jumper the BOOT and GND pins but other than that I'm at a loss. Any help would be greatly appreciated. -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
