First things to check: - Are you getting the charging icon on the phone when plugging in the IOIO? If not, check your power supply, that the trim pot on the IOIO is fully clockwise and that you're using the correct OTG cable supplied with the IOIO (or otherwise try to put the host mode switch in the "H" position). - Are you getting the accessory dialog to show up when the IOIO is plugged in. If not, you might have forgotten to turn USB debugging off.
On Tue, Jun 17, 2014 at 12:41 PM, Les Hall <[email protected]> wrote: > Hi, I put a copy of the HelloIOIO.apk on my Samsung Galaxy S3 phone and it > runs but does not turn the LED on the board on/off as it should. I cannot > get other programs to talk to the IOIO board. IOIO is working because i > reflashed it with the latest firmware. Ideas? > > Les > > -- > You received this message because you are subscribed to the Google Groups > "ioio-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
