As I thought, the file is corrupt. To download properly: Either *click* the QR code on the downloads page or *click* the file name in the github page and then click *raw*. Do* not* right-click and "save as".
The .zip file is not relevant to IOIODude, this is the Java code that goes on your Android / PC. No idea why you're not able to get the blinking. Could be that you have a bad contact between the boot pin and GND upon power-up. On Tue, Jun 24, 2014 at 3:57 AM, jossie kat <[email protected]> wrote: > > Hi Ytai, > > Are you running from the directory where the ioioapp file is? -* Yes* > > App-IOIO0504.zip - Application bundle does not include an image for > the platform IOIO0030 > > App-IOIO0500.ioioapp - Caught IOException. Exiting. > > File Sources: > > https://github.com/ytai/ioio/tree/master/release/firmware/application > > https://github.com/ytai/ioio/tree/master/release/software. > > links taken from https://github.com/ytai/ioio/wiki/Downloads > > > > Also having problem reproducing blinking effect when detaching jumper wire > from boot and ground to enable boot state. > > hopefully I would not have to repeat it every time i'll need new write to > the device FW/SW. taught it was via some kind of GUI > > > best regards and thanks for the swift response. > > > jossie. > > > > > > > On Tuesday, June 24, 2014 3:10:35 AM UTC+3, Ytai wrote: > >> This is potentially due to a corrupt ioioapp file. Are you running from >> the directory where the ioioapp file is? Can you verify its integrity by >> changing the suffix to .zip and trying to extract it? How did you download >> it? >> >> >> On Mon, Jun 23, 2014 at 12:07 PM, jossie kat <[email protected]> wrote: >> >>> >>> >>> *OS*: darwin13 OSX version 10.9.4 >>> >>> *Computer* : macbook air >>> >>> *device:IOIO-OTG sparkfun* >>> >>> script i wrote: >>> >>> >>> *./ioiodude * >>> >>> IOIODude V1.0 >>> >>> >>> *ls /dev/tty.usb* * >>> >>> /dev/tty.usbmodem1421 >>> >>> >>> *./ioiodude --port=/dev/tty.usbmodem1421 versions* >>> >>> IOIO Application detected. >>> >>> >>> Hardware version: SPRK0020 >>> >>> Bootloader version: IOIO0400 >>> >>> Application version: IOIO0330 >>> >>> >>> *./ioiodude --port=/dev/tty.usbmodem1411 --reset write >>> App-IOIO0500.ioioapp* >>> >>> causes device either to stuck or IOException >>> >>> I tried several FW files with no help. >>> >>> regards >>> >>> joseph. >>> >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "ioio-users" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To post to this group, send email to [email protected]. >>> >>> Visit this group at http://groups.google.com/group/ioio-users. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- > You received this message because you are subscribed to the Google Groups > "ioio-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
