Hey,
I am trying to upgrade the firmware. I am using Ubuntu 13.10 x32. I have
added the udev rule, and restarted the service, and also restarted my
laptop. I turned IOIO off, and connected the boot to GND, connected the
usb, and removed the boot connection. The yellow LED did blink about 4
times.
In the terminal I entered lsusb, the output has :
Bus 002 Device 040: ID 1b4f:0008
About 1/10 times that I enter lsusb. Notice that the device is not named
(not identified).
Also if I enter ls /dev/IOIO*, I get:
/dev/IOIO0
Also 1 out of 10 times.
To be clear: My VREG is fried, but I usually operate through 5V pin, and it
works perfectly (UART and 3.3V out) on the older firmware. The USB cable is
lighting the LED up also.
Is that connected somehow?
The udev rule is:
ACTION=="add", SUBSYSTEM=="tty", SUBSYSTEMS=="usb",
ATTRS{idVendor}=="1b4f", ATTRS{idProduct}=="0008", SYMLINK+="IOIO%n",
MODE="666"
--
You received this message because you are subscribed to the Google Groups
"ioio-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send email to [email protected].
Visit this group at http://groups.google.com/group/ioio-users.
For more options, visit https://groups.google.com/d/optout.
