Most likely the actual problem is that you're using an inadequate power supply. Make sure to budget 2.5W for charging the Android as well as however much you need for your load. On Aug 24, 2014 10:46 PM, "Jiexin Wang" <[email protected]> wrote:
> I kinda find out the problem is the battery of the phone is not full > charged.... > > On Friday, August 22, 2014 10:41:35 PM UTC+9, Jiexin Wang wrote: >> >> Hey Guys, >> >> I'm recently using ioio + nexus 4 to control a motor. >> I had some problem about the connection between ioio board and the phone. >> The red led on ioio board is always on. But with the phone, after running >> a while, the motor starts to stop and run repeatedly. >> The phone also starts to disconnect and connect again and again, showing >> "connected as a media device" and "USB debugging connected" in turn. >> And if I change the phone, the frequency of the flashing is different but >> still, the problem exists. >> You guys have any ideas about this? >> Thank you so much. >> >> Best, >> Jx >> >> -- > You received this message because you are subscribed to the Google Groups > "ioio-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
