Hi all, I would like to use ioio-otg to sample some audio signal for an android phone. And the default A/D sampling rate 1kHZ is too low for me, I'd like to have a sample rate around 10khz. after read the relevant discussion in this group, it seems I just need to simply change a "PR3" settings and build my own firmware.
So I download a maple ide(now its v2.15) , and then XC16 complier. It seems C30 complier is not avaliable for downloading. after choose the complier in ide. I can successfully built the project and got a hex file as dist/ioio0021/production/app_layer_v1.production.hex then I compiled the /tools/hex2ioio/hex2ioio.c and use it to transfer the above hex file to a .ioio file. But then i am confused about how to use the ioio-bundle tools to get a ioioapp file. it required a multiple file input but I only have one hex file. I am using windows7, 32 bit version. Does I need a cygwin installed to build the firmware in cmd line? if so, is there any guild-line to do this? I am not familiar with linux environment, so quite worry about it. Any suggestions? Thanks in advance! -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
