for my last robot, I used a pan & tilt system based on the SPT200 and a Reticam phone holder. It's extremely robust and very stable compared to the LynxB I used before. You might want to look at it.
HS-485HB Servo http://www.robotshop.com/en/hitec-hs-485hb-servo-motor.html SPT200 Direct Drive Pan & Tilt System http://www.robotshop.com/en/servocity-spt200-pan-tilt.html Direct Drive Pan Base Mount for SPT200 http://www.robotshop.com/en/direct-drive-pan-base-mount-spt200-or-ddp125.html RetiCAM® Smartphone Tripod Mount http://www.amazon.com/RetiCAM%C2%AE-Smartphone-Tripod-Mount-Universal/dp/B00FS5L9D4/ On Sunday, January 4, 2015 9:34:24 PM UTC-8, Bill Carter wrote: > > Cute! I look at pan/tilt hardware that is available online and I don't > like what I see. All of the small instantiations seem to rely on the shaft > of the servo motors as support, very poor. I can't see it slinging around > the body of a cellphone for more than a few days or weeks. > > On Sunday, January 4, 2015 10:34:40 PM UTC-6, Al B wrote: >> >> Do you mean like this? >> >> http://youtu.be/IpGD7KBM4zA >> >> > I want to mount the cellphone on pan/tilt mechanisms >> > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
