Re: Repeated disconnects?

[mark . melvin]

Hi Ytai, I am using the phone as the host as I want the IOIO powered by the phone. I have not disabled usb debugging as when I do that I am not able to debug over wifi. I could try that and check the log I suppose.  Thanks,  Mark From: Ytai Ben-Tsvi Sent: Tuesday, January 6, 2015 9:32 PM To: ioio-users@googlegroups.com Reply To: ioio-users@googlegroups.com Subject: Re: Repeated disconnects? I don't know of a better way to define this setting in the project. What you did is how I would do it. And soon we'd need to learn the AS-way of doing it :) But you got a little taste of why "the JAR way" discussed on the other thread wouldn't cut it. I don't know anything specific about the new Moto X. I have the old one and it works just fine. Did you remember to turn USB debugging off during your test? As a fallback, you could try reversing the roles (phone is the host) with the side-effect that the IOIO no longer charges the phone, but OTOH could be powered by it (unless you power it externally and then it doesn't). On Sun, Jan 4, 2015 at 2:54 PM, Mark Melvin <mark.mel...@gmail.com> wrote: I figured out the problem.  My application did not have permission for the networking component.  It turns out the root cause was that I was not merging the manifests from the dependent IOIO libraries.  This was basically setting the following in project.properties: manifestmerger.enabled=true Does anyone know how this normally gets set?  Is it a manual thing, or is there a setting somewhere in the manifest editor or project properties UI that I am missing? On a related note, it seems that the Moto-X (ver 2) is not using Open Accessory, but reverts to USB device mode.  I sort of expected Open Accessory to just work.  Is there something else I may be missing to enable this functionality?  I am depending on all the appropriate libraries.  The IOIO Simple App also does not use Open Accessory mode. Thanks, Mark. On Friday, 2 January 2015 11:38:48 UTC-5, Mark Melvin wrote: Hi all, I have an application that works fine on the PC, and I am now porting it to android. It uses the led/dio, and twi0. I have yet to test the TWI part of things (for now it is completely commented out), but I am seeing repeated disconnects and reconnects flooding the log when I run my skeleton app. It seems to run fine (I flash the led in my setup method), but I assume these messages are not normal.  Is there anything specific I can look for when trying to narrow this down? I am using the ioio-otg with a Moto-X (2nd gen), and the IOIO is powered by the Moto-X via an OTG adapter cable. Thanks,  Mark -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to ioio-users+unsubscr...@googlegroups.com. To post to this group, send email to ioio-users@googlegroups.com. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to ioio-users+unsubscr...@googlegroups.com. To post to this group, send email to ioio-users@googlegroups.com. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to ioio-users+unsubscr...@googlegroups.com. To post to this group, send email to ioio-users@googlegroups.com. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.