Hello guys, I know about the warnings that you should not do this, but it happened. And as expected my IOIO is no more working like expected. I did not find any description what is happening and why this configuration is so dangerous for the board.
So this is behaviour now: If I connect the board to pc, window device manager is showing it in list. I am able to flash firmware in boot mode, read versions and validate fingerprint. But when I start IOIO-Bridge and try to connect, it tells me "error: device not found". But it seems that hardware is okay. If I connect in boot mode, following information are given by IOIO-Dude: .\ioiodude.bat --port=COM8 versions IOIO Bootloader detected. Hardware version: SPRK0020 Bootloader version: IOIO0400 Platform version: IOIO0030 .\ioiodude.bat --port=COM8 fingerprint ffffffffffffffffffffffffffffffff As you see fingerprint is invalid so I flash the firmware again. .\ioiodude.bat --port=COM8 write .\App-IOIO0500.ioapp Comparing fingerprints... Fingerprint mismatch. Writing image... [########################################] Writing fingerprint... Done. Checking fingerprint... .\ioiodude.bat --port=COM8 --reset fingerprint d895d272a4b98529693fcdc4f69eeb3c ...seems fine now and in normal mode I can read the version information... .\ioiodude.bat --port=COM8 versions IOIO Application detected. Hardware version: SPRK0020 Bootloader version: IOIO0400 Application version: IOIO0500hier eingeben... ...but bridge is not working. .\ioiobridge.bat COM8 error: device not found error: device not found And if I restart in boot mode, fingerprint is invalid again. .\ioiodude.bat --port=COM8 fingerprint ffffffffffffffffffffffffffffffff .\ioiodude.bat --port=COM8 --reset versions IOIO Bootloader detected. Hardware version: SPRK0020 Bootloader version: IOIO0400 Platform version: IOIO0030 .\ioiodude.bat --port=COM8 versions IOIO Application detected. Hardware version: SPRK0020 Bootloader version: IOIO0400 Application version: IOIO0500 Everything was working fine before this stupid mistake. I don't understand why everything is working well but the application connection. But maybe there is a way to rescue this brilliant piece? Hope for your ideas and advices. Fabian -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
