I suggest you start with the precompiled HelloIOIO.apk, just to verify that you have a functional setup. After that, if you're having trouble with AppInventor-related stuff, I suggest you contact the author of the page you linked to. It is not an official part of the IOIO codebase and I don't know how it works or what is error 631.
On Sun, Mar 29, 2015 at 6:53 PM, <[email protected]> wrote: > Hey everyone. > > I'm trying to run IOIOsimpleLED < found here: > http://doc.inex.co.th/ioio-board-how-to-use-ioio-inventor/ >. > > I'm using an IOIO OTG (V4.01 bootloader and the V5.00 application > firmware) and a Samsung Galaxy Tab 4 (running 4.4.2), with App Inventor 2. > I was getting a 631 error code, but now it just says "Can't connect with > IOIO". USB debugging is deactivated. > > I also ran an OpenAccessory checker and it says that I need version > IOIO0200 or higher- but I'm not sure where to get the Open accessory > protocol. > > Thanks. > > -- > You received this message because you are subscribed to the Google Groups > "ioio-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
