What bootloader did you put on it? Was it able to correctly talk to IOIODude? What app did you install? 5 blinks doesn't mean anything... Possibly corrupt firmware. On Apr 1, 2015 4:13 PM, "Vic Wintriss" <g...@san.rr.com> wrote:
> Actually it blinks 5 times...only when the usb cable is connected to a > phone. Any idea what that means? The boot pin is not being held low. > > On Wednesday, April 1, 2015 at 2:24:55 PM UTC-7, Ytai wrote: >> >> That means that you're in bootloader mode. This will happen when you >> power on with the boot pin held low. >> On Apr 1, 2015 1:22 PM, "Vic Wintriss" <g...@san.rr.com> wrote: >> >>> When I power on, the LED blinks 3 times. Is that normal operation? I >>> think that I have IOIO0500 installed. >>> >>> On Wednesday, April 1, 2015 at 11:41:06 AM UTC-7, Ytai wrote: >>>> >>>> The HOST signal is active high. >>>> >>>> On Tue, Mar 31, 2015 at 2:58 PM, Vic Wintriss <g...@san.rr.com> wrote: >>>> >>>>> When you say assert, do you mean assert high or assert low? >>>>> >>>>> On Tuesday, March 31, 2015 at 2:36:24 PM UTC-7, Ytai wrote: >>>>>> >>>>>> The IOIO decides whether it should be host or device based on whether >>>>>> the USBID pin is pulled low (host) or left floating (device). On the >>>>>> standard IOIO board this pin would get pulled low by either plugging in a >>>>>> USB micro A connector to the A/B socket or by forcing it low using the >>>>>> on-board switch. >>>>>> When the IOIO application firmware detects that USBID is pulled low, >>>>>> it will assert the HOST signal, which will cause 5V to be supplied on the >>>>>> VBUS rail. >>>>>> >>>>>> On Tue, Mar 31, 2015 at 1:06 PM, Vic Wintriss <g...@san.rr.com> >>>>>> wrote: >>>>>> >>>>>>> I got the boot loader flashed and am able to run the blink app...but >>>>>>> having trouble with the Android charging circuit. >>>>>>> >>>>>>> Is there a detailed description of the Android charging circuit >>>>>>> including the operation of Q1, Q2 and the VBUS and HOST pins of the PIC? >>>>>>> My new circuit implementation does not seem to be charging the Android >>>>>>> properly. >>>>>>> >>>>>>> On Monday, March 30, 2015 at 9:26:30 PM UTC-7, Vic Wintriss wrote: >>>>>>>> >>>>>>>> Thanks…think I got it running with the Pickit3…I’ll let you know. >>>>>>>> >>>>>>>> On Mar 30, 2015, at 9:18 PM, Ytai Ben-Tsvi <yta...@gmail.com> >>>>>>>> wrote: >>>>>>>> >>>>>>>> There's not much to it. Get a PIC programmer, or use a second IOIO >>>>>>>> as such. Flash the bootloader image that you can download from the >>>>>>>> downloads page and finally use IOIODude as usual to flash the >>>>>>>> application >>>>>>>> firmware. >>>>>>>> Here's an example of how to do the second IOIO way: >>>>>>>> https://www.youtube.com/watch?v=eUKAPP63QtU >>>>>>>> >>>>>>>> On Mon, Mar 30, 2015 at 6:40 PM, Vic Wintriss <g...@san.rr.com> >>>>>>>> wrote: >>>>>>>> >>>>>>>>> Just got my new VicsWagon boards back with PIC soldered on the >>>>>>>>> robot board with all ioio circuitry on the board, too. Where are the >>>>>>>>> best >>>>>>>>> instructions for flashing a boot loader and app firmware? >>>>>>>>> >>>>>>>>> -- >>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>> Groups "ioio-users" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>> send an email to ioio-users+...@googlegroups.com. >>>>>>>>> To post to this group, send email to ioio-...@googlegroups.com. >>>>>>>>> Visit this group at http://groups.google.com/group/ioio-users. >>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> You received this message because you are subscribed to a topic in >>>>>>>> the Google Groups "ioio-users" group. >>>>>>>> To unsubscribe from this topic, visit https://groups.google.com/d/ >>>>>>>> topic/ioio-users/vOzO1t92Ryg/unsubscribe. >>>>>>>> To unsubscribe from this group and all its topics, send an email to >>>>>>>> ioio-users+...@googlegroups.com. >>>>>>>> To post to this group, send email to ioio-...@googlegroups.com. >>>>>>>> Visit this group at http://groups.google.com/group/ioio-users. >>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "ioio-users" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to ioio-users+...@googlegroups.com. >>>>>>> To post to this group, send email to ioio-...@googlegroups.com. >>>>>>> Visit this group at http://groups.google.com/group/ioio-users. >>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>> >>>>>> >>>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "ioio-users" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to ioio-users+...@googlegroups.com. >>>>> To post to this group, send email to ioio-...@googlegroups.com. >>>>> Visit this group at http://groups.google.com/group/ioio-users. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>> >>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "ioio-users" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to ioio-users+...@googlegroups.com. >>> To post to this group, send email to ioio-...@googlegroups.com. >>> Visit this group at http://groups.google.com/group/ioio-users. >>> For more options, visit https://groups.google.com/d/optout. >>> >> -- > You received this message because you are subscribed to the Google Groups > "ioio-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ioio-users+unsubscr...@googlegroups.com. > To post to this group, send email to ioio-users@googlegroups.com. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to ioio-users+unsubscr...@googlegroups.com. To post to this group, send email to ioio-users@googlegroups.com. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
