This most likely have to do with data getting dropped / corrupt as result of the higher bandwidth imposed by using AnalogInput (1000 10-bit samples per second per channel + some overhead). I have found that different dongles tend to exhibit this behavior while others don't. Can you try the same IOIO with the same dongle against all three phones as opposed to have 3 different IOIOs and dongles?
On Thu, Apr 2, 2015 at 11:51 PM, Emre <[email protected]> wrote: > Then got this >> > > 04-03 09:45:53.290: E/IOIOProtocol(2660): Protocol error: > 04-03 09:45:53.290: E/IOIOProtocol(2660): > ioio.lib.impl.IOIOProtocol$ProtocolError: Received unexpected command: 0x8 > 04-03 09:45:53.290: E/IOIOProtocol(2660): at > ioio.lib.impl.IOIOProtocol$IncomingThread.run(IOIOProtocol.java:928) > 04-03 09:45:53.300: D/IOIOImpl(2660): Physical disconnect. > 04-03 09:45:53.300: V/BluetoothIOIOConnection(2660): Client initiated > disconnect > 04-03 09:45:53.300: W/bt-btif(917): > bta_jv_rfc_port_to_cb(port_handle:0x15):jv handle:0x0 not FOUND > 04-03 09:45:53.370: D/IOIOImpl(2660): Waiting for IOIO connection > 04-03 09:45:53.370: V/IOIOImpl(2660): Waiting for underlying connection > 04-03 09:45:53.370: D/BluetoothAdapterService(1110273000)(917): Get Bonded > Devices being called > 04-03 09:45:53.370: D/BluetoothAdapterProperties(917): getBondedDevices: > length=1 > 04-03 09:45:53.370: V/BluetoothIOIOConnection(2660): Attempting to connect > to Bluetooth device: IOIO (71:50) > 04-03 09:45:53.370: W/BluetoothAdapter(2660): getBluetoothService() called > with no BluetoothManagerCallback > 04-03 09:45:53.380: D/BTIF_SOCK(917): service_uuid: > 00001101-0000-1000-8000-00805f9b34fb > 04-03 09:45:53.380: D/BluetoothSocket(2660): connect(), SocketState: INIT, > mPfd: {ParcelFileDescriptor: FileDescriptor[76]} > 04-03 09:45:53.410: W/bt-sdp(917): process_service_search_attr_rsp > 04-03 09:45:53.480: W/bt-btif(917): new conn_srvc id:26, app_id:1 > 04-03 09:45:53.480: W/bt-btif(917): bta_dm_pm_ssr conn_srvc id:26, app_id:1 > 04-03 09:45:53.480: W/bt-btif(917): bta_dm_pm_ssr:2, lat:1200 > 04-03 09:45:53.480: V/BluetoothIOIOConnection(2660): Established > connection to device IOIO (71:50) address: 00:1A:7D:DA:71:50 > 04-03 09:45:53.480: V/IOIOImpl(2660): Waiting for handshake > 04-03 09:45:53.490: I/IncomingState(2660): IOIO Connection established. > Hardware ID: SPRK0016 Bootloader ID: IOIO0311 Firmware ID: IOIO0500 > 04-03 09:45:53.490: V/IOIOImpl(2660): Querying for required interface ID > 04-03 09:45:53.500: V/IOIOImpl(2660): Required interface ID is supported > 04-03 09:45:53.500: I/IOIOImpl(2660): IOIO connection established > 04-03 09:45:54.510: D/dalvikvm(2660): GC_FOR_ALLOC freed 511K, 20% free > 3528K/4408K, paused 15ms, total 15ms > 04-03 09:46:00.220: W/bt-btif(917): dm_pm_timer expires > 04-03 09:46:00.220: W/bt-btif(917): dm_pm_timer expires 0 > 04-03 09:46:00.220: W/bt-btif(917): proc dm_pm_timer expires > 04-03 09:46:00.230: E/bt-btif(917): bta_dm_pm_btm_status hci_status=36 > 04-03 09:46:04.170: D/dalvikvm(2660): GC_FOR_ALLOC freed 511K, 20% free > 3529K/4408K, paused 35ms, total 35ms > > > -- > You received this message because you are subscribed to the Google Groups > "ioio-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
