I can't think of any tricks to play with the existing interfaces in order to implement this protocol. Your options seem to be either some custom firmware or a small micro in the middle that acts as a bridge (for example, reads a sample every time on is available and sends it over serial). The latter is probably less work but slightly less elegant. On May 9, 2015 8:07 AM, "Egbert Boer" <egbertthe...@gmail.com> wrote:
> Hello, > > I Would like to interface the HX711 with the IOIO is this possible? > > Datasheet: http://www.dfrobot.com/image/data/SEN0160/hx711_english.pdf > > It needs a serial interface that is not standard. > > Best Regards Egbert > > -- > You received this message because you are subscribed to the Google Groups > "ioio-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ioio-users+unsubscr...@googlegroups.com. > To post to this group, send email to ioio-users@googlegroups.com. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to ioio-users+unsubscr...@googlegroups.com. To post to this group, send email to ioio-users@googlegroups.com. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.