Okay, thank you very much. Here's the beast : http://ww1.microchip.com/downloads/en/DeviceDoc/21935D.pdf you can see at following pages:
- 17 -> a diagram to read temperature - 9 -> every pins function Here's what I bought : http://www.microbot.it/documents/mr003-001_datasheet.pdf so all the pull-up resistance are inside and i'm not using the int pin, I didn't touch to A0 1 and 2. The writeread value send "false" so i've tried with different data length, i thought understand that it was on 3 bytes and a request with the sensor adress was needed ( in the 4.1.1 of microchip's pdf ). It's also talking about registers, it needs to be addressed using the Register Pointer. Here's my wiring made with my awesome skill with photoshop (paint actually): <https://lh3.googleusercontent.com/-ZbRhzN6nUgg/VV5QtVD5FzI/AAAAAAAAEWs/1od_2qCz4u0/s1600/Image1.png> And here I don't know what else to try. Thanks a lot for your reply. Have a nice day. -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
