I'm still curious about the images but that's not a good enough reason, I
withdraw my request
I am now able to build the applications - noob issue. I found that if you
browse in the project explore to each application's build.gradle file and
open it, you'll get a message at the top:
This folder does not belong to a Gradle project. Make sure it is registered
in settings.gradle.
To right of this there is an Add Now... link that will do this for you.
Click the link and it will start a Gradle sync and create a run/debug
configuration for you. After that the application name will appear bolded
in project explorer and you can run it on your phone.
For HelloIOIO, the settings.gradle line appended looks like this:
project(':HelloIOIO').projectDir = new File('applications/HelloIOIO')
I tried directly adding similar lines for the other sample apps, but that
did not work - it would say the project could not be found. But the Add
Now... link does work and also generates a new iml file for the subproject
which has a different name than the one generated by the original import to
AS.
I'm still trying to understand how to enable debugging while connected to
the board via usb. I have a wifi adb connection established with the
phone, but it dies when I disable usb debugging on the phone so the IOIO
can connect. But I'll open that as a separate thread if research fails me.
On Monday, June 8, 2015 at 3:50:18 AM UTC-5, Egbert Boer wrote:
>
> Is anyone still in need for the images? As i understand it is no longer
> needed?
>
> 2015-06-08 1:22 GMT+02:00 Karim Virani <[email protected] <javascript:>>
> :
>
>>
>> Thanks for pushing this forward! With my feedback you get a noob
>> perspective with regard to AS and gradle. Hopefully this will help you
>> harden your solution against beginner mistakes. I'm also responsible
>> mentoring a couple of high school robotics teams into developing with IOIO
>> and AS. So I'll be pulling more noobs along with me.
>>
>> I followed your advice and began with importing the entire software
>> folder as a gradle project. From there I just accepted any defaults it
>> recommended. It needed a lot of old and/or deprecated android or google
>> APIs downloaded. I had to download API levels 7, 10 and 12. Perhaps this
>> transition to AS is a good time to update some of the older references
>> scattered throughout the project. I plan to target a minimum API of 14 or
>> 15 which gets us into ICS and supporting over 95% of all active android
>> phones. By getting us to android 4+ we also get the more robust software
>> fusion sensors that improve motion estimation. This is helpful in robotics
>> and potentially reduces the number of external sensors required.
>>
>> It couldn't build IOIOManager because it's defined as a release build,
>> but (appropriately) you didn't include your keystore properties in the repo:
>>
>> > Could not find property 'RELEASE_STORE_FILE' on
>> SigningConfig_Decorated{name=r...
>>
>> I toyed with supplying info for my own keystore, but then thought maybe I
>> shouldn't be building IOIOManager since it's a utility you already publish
>> in Google Play and it isn't really meant to be the foundation of a user
>> app? So instead I removed:
>> 'applications/IOIOManager',
>> from the android section in settings.gradle in the software folder.
>>
>> This allowed gradle to proceed building.
>>
>> The next hurdle I ran into was a problem with git:
>>
>> Error:(56) A problem occurred evaluating root project 'software'.
>> > Cannot run program "git": CreateProcess error=2, The system cannot find
>> the file specified
>>
>> As a github for windows user, I was content with using the git shell it
>> provided. I even had the path to the portable git bin folder configured in
>> AS. But I think the gradle build wants the system path to be able to find
>> git in the regular cmd shell.
>>
>> After restarting AS I was able to continue the build and it finally
>> completed the gradle build with only the warning about file encoding
>> settings.
>>
>> It then popped up a dialog to add a bunch of generated .iml files to
>> git. I'm not sure if these should be added or gitignored? I cancelled
>> that dialog.
>>
>> The AAR files for the main libraries were successfully created!
>>
>> But none of the android apps were built. If I try running the gradle
>> build for a specific app (either run or debug from within AS), it reports
>> the build is successful but doesn't generate an apk or even create a build
>> folder. It's like it doesn't think it needs to do anything.
>>
>> I'm not sure where to go from here.
>>
>> Thanks for any guidance you can provide.
>>
>> On Saturday, June 6, 2015 at 12:41:21 AM UTC-5, Ytai wrote:
>>>
>>> I pushed the current state of my work to GitHub under the 'gradle'
>>> branch.
>>>
>>> Status summary:
>>>
>>> - Complete Gradle build support for everything, including generating
>>> the software release bundle. If you run 'gradle build' from the software
>>> directory you'll get all the libraries and software apps generated,
>>> including the AAR you were asking about. 'gradle bundle' would create a
>>> zip
>>> file in the release directory containing all the artifacts, sample apps,
>>> javadoc, etc.
>>> - Eclipse support is now not great. All the projects have been
>>> converted to Gradle projects, but it seems like Eclipse doesn't work
>>> seamlessly with Gradle, so it is more convenient to build from command
>>> line.
>>> - Haven't yet tried to import into AS, though it should be close to
>>> trivial now. I recommend importing the entire software directory as one
>>> project for now. In the future I'll make it simpler.
>>> - Haven't yet uploaded the JAR/AAR to Maven Central, although I
>>> intend to. At the end of this process it will be fairly easy to write a
>>> IOIO app from scratch without having to download much or anything at all.
>>> - I can't promise to answer any question you might have about this.
>>> It is all work in progress still. There's also still no documentation on
>>> the Wiki yet on how to work with the new stuff. I believe you should be
>>> fine if you have some experience with AS/Gradle.
>>> - There might be non-compatible changes by the time I actually
>>> release this. Probably nothing radical though.
>>> - I would highly appreciate any feedback, as most of this stuff is
>>> new to me and I might have done things in a suboptimal way.
>>>
>>>
>>>
>>> On Fri, Jun 5, 2015 at 9:41 AM, Karim Virani <[email protected]>
>>> wrote:
>>>
>>>> Ytai, I'm looking forward to your impending AS support - do you have a
>>>> timeline on it? Should we be able to build a working app from your gradle
>>>> branch as it is now?
>>>>
>>>> In the meantime, Egbert, I'd really love to follow your process, but
>>>> the images are not visible to us. Inspecting the source it looks like you
>>>> may have pasted from a word doc? Anyhow, the image sources point to files
>>>> on your local windows system, so you are the only one who can see them at
>>>> the moment. Hope you get a chance to update your writeup.
>>>>
>>>> Thanks.
>>>>
>>>> On Thursday, May 28, 2015 at 1:38:50 PM UTC-5, Ytai wrote:
>>>>>
>>>>> Thanks for sharing that.
>>>>> I'm actually in the middle of converting everything to Gradle, then
>>>>> adding AS support and upload packages to Maven, so hopefully your
>>>>> tutorial
>>>>> will not be needed for much longer.
>>>>> As for your questions:
>>>>>
>>>>> - *android app future.usb.usbmanager not found*: you need to use
>>>>> the "Google-API" version of the SDK. For example, in my (yet
>>>>> unpublished)
>>>>> Gradle scripts, I'm building IOIOLibAccessory with compileSdkVersion
>>>>> "Google Inc.:Google APIs:12".
>>>>> - *my app is says my firmware is incompatible*: This is pretty
>>>>> self-explaining. Upgrade your firmware...
>>>>>
>>>>>
>>>>> On Thu, May 28, 2015 at 7:23 AM, Egbert Boer <[email protected]>
>>>>> wrote:
>>>>>
>>>>>> Generating AAR file for use in android studio.
>>>>>>
>>>>>> I did a small write up for people who want to use IOIO library in
>>>>>> android studio.
>>>>>>
>>>>>> Open android studio and open a new project.
>>>>>>
>>>>>> Application name IOIO
>>>>>>
>>>>>> Add no activity.
>>>>>>
>>>>>> Select file new module > android library.
>>>>>>
>>>>>> Application name and module name : ioio
>>>>>>
>>>>>> Add no activity.
>>>>>>
>>>>>> Now download the latest package from IOIO website and extract.
>>>>>>
>>>>>> Goto \IOIOLib\src\ioio\lib select directorys api, impl, spi, util.
>>>>>>
>>>>>> In android studio in the project tree
>>>>>>
>>>>>> Drag the selected folders from explorer into android studio in the
>>>>>> re.ioio directory.
>>>>>>
>>>>>> Next goto IOIOLib\target\android\src\ioio\lib\util select all file
>>>>>> and folders inside util.
>>>>>>
>>>>>> Drag the selected folder & files from explorer into android studio in
>>>>>> the re.ioio\util directory.
>>>>>>
>>>>>> Next goto IOIOLib\target\android\src\ioio\lib\spi select all file
>>>>>> and folders inside util.
>>>>>>
>>>>>> Drag the selected folder & files from explorer into android studio in
>>>>>> the re.ioio\spi directory.
>>>>>>
>>>>>> Now do the same for the directory: IOIOLibAccessory,
>>>>>> IOIOLibAndroidDevice, IOIOLibBT
>>>>>>
>>>>>> In IOIOLib\target select target android or pc and drag and drop files
>>>>>> in your project tree
>>>>>>
>>>>>> Select the ioio top folder int the project tree and right click on
>>>>>> it. Select replace in path.
>>>>>>
>>>>>> Fill in the fields as shown on the picture, don’t forget to select
>>>>>> scope > whole project
>>>>>>
>>>>>> A dialog will appear select > all files.
>>>>>>
>>>>>> Make sure you have google API installed in the SDK manager.
>>>>>>
>>>>>> Now your ready to build. Select Build > Make project.
>>>>>>
>>>>>> Your AAR file will be in \IOIO\IOIO\ioio\build\outputs\aar.
>>>>>>
>>>>>>
>>>>>>
>>>>>> How to use the aar file:
>>>>>>
>>>>>> In android studio create new project, with blank activity.
>>>>>>
>>>>>> Copy the AAR file to \MyApplication\app\libs.
>>>>>>
>>>>>> In build.gradle (module) add:
>>>>>>
>>>>>> dependencies {
>>>>>>
>>>>>> compile fileTree(dir: 'libs', include: ['*.jar'])
>>>>>>
>>>>>> compile 'com.android.support:appcompat-v7:22.0.0'
>>>>>>
>>>>>> compile(name:'ioio-debug', ext:'aar')
>>>>>>
>>>>>> }
>>>>>>
>>>>>> repositories{
>>>>>>
>>>>>> flatDir{
>>>>>>
>>>>>> dirs 'libs'
>>>>>>
>>>>>> }
>>>>>>
>>>>>> }
>>>>>>
>>>>>>
>>>>>>
>>>>>> In AndroidManifest.xml add:
>>>>>>
>>>>>> <uses-permission android:name="android.permission.BLUETOOTH" />
>>>>>>
>>>>>> <uses-permission
>>>>>> android:name="android.permission.BLUETOOTH_ADMIN" />
>>>>>>
>>>>>> <uses-permission android:name="android.permission.INTERNET"/>
>>>>>>
>>>>>> *Library path use re.ioio instead of ioio.lib*
>>>>>>
>>>>>>
>>>>>>
>>>>>> Troubles: android app future.usb.usbmanager not found.
>>>>>>
>>>>>> the solution is using android.hardware.usb instead of
>>>>>> com.android.future.usb
>>>>>>
>>>>>> .getInstance(wrapper); not found. In Adapter.java
>>>>>>
>>>>>>
>>>>>>
>>>>>> If i test my app is says my firmware is incompatible. What am i doing
>>>>>> wrong here?
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> You received this message because you are subscribed to the Google
>>>>>> Groups "ioio-users" group.
>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>> send an email to [email protected].
>>>>>> To post to this group, send email to [email protected].
>>>>>> Visit this group at http://groups.google.com/group/ioio-users.
>>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>>
>>>>>
>>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "ioio-users" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>> an email to [email protected].
>>>> To post to this group, send email to [email protected].
>>>> Visit this group at http://groups.google.com/group/ioio-users.
>>>> For more options, visit https://groups.google.com/d/optout.
>>>>
>>>
>>> --
>> You received this message because you are subscribed to a topic in the
>> Google Groups "ioio-users" group.
>> To unsubscribe from this topic, visit
>> https://groups.google.com/d/topic/ioio-users/Q9RsTm7ic_8/unsubscribe.
>> To unsubscribe from this group and all its topics, send an email to
>> [email protected] <javascript:>.
>> To post to this group, send email to [email protected]
>> <javascript:>.
>> Visit this group at http://groups.google.com/group/ioio-users.
>> For more options, visit https://groups.google.com/d/optout.
>>
>
>
--
You received this message because you are subscribed to the Google Groups
"ioio-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send email to [email protected].
Visit this group at http://groups.google.com/group/ioio-users.
For more options, visit https://groups.google.com/d/optout.
