So is this over Bluetooth? If so, you might be saturating the bandwidth causing data corruption. This should NOT happen, even when opening all 16 channels at the same time. Consider trying a different dongle or phone. On Nov 20, 2015 12:04 PM, "Daniel Brown" <[email protected]> wrote:
> one more thing, when using a direct USB connection it works fine. > > On Friday, November 20, 2015 at 12:57:07 PM UTC-7, Daniel Brown wrote: >> >> if this line of code is in the IOIO will connect for a second them >> disconnect then repeat. >> >> input_ = ioio_.openAnalogInput(40); >> >> I have tried 3 different IOIO boards with the same result and I have >> tried may different code examples, the line above is from IOIOSimpleApp >> <https://github.com/ytai/ioio/tree/master/software/applications/IOIOSimpleApp> >> >> I have tried to ground the pin and use a pot, it will read for a second >> them disconnect and repeat. everything else is fine, digital input, PWM >> input, all good. >> > -- > You received this message because you are subscribed to the Google Groups > "ioio-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
