I have a IOIO-OTG with the following versions reported by the IOIODUDE application:
Hardware version: SPRK0020 Bootloader version: IOIO0400 Application version: IOIO0506 The problem is getting the Bluetooth to work. USB connection to my PC (Windows 8.1) is working now, though not at first. At first Windows kept saying it was not a recognized device and would not let me select the driver for it. Once I started the IOIO in bootloader mode then Windows finally enumerated the USB connection. I took the opportunity then to update to the 506 application firmware (prior to that IOIODUDE reported "Platform version: IOIO0030" instead of an Application Version). Now USB connection works fine even in normal boot mode. Perhaps this bit about starting in bootloader mode will help others too. So now for the Bluetooth... My PC recognizes and pairs with a Bluetooth mouse as well as my dumb phone without any trouble. So I know that the PC's own Bluetooth is working. I am using the USB cable and Bluetooth adaptor that came with the IOIO. I have a 6V power supply and I have the charge limiting potentiometer turned fully clockwise and I have the mode switch set to "H". I have tried powering up the IOIO with the Bluetooth adaptor already plugged in and also tried powering up the IOIO first and then plugging in the Bluetooth adaptor to the USB cable. Still when I go to Windows 8.1's "Bluetooth Settings" app and watch it trying to discover devices it does not show the IOIO. What I am missing? -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
