Hi I have an old ioio V1 board that I connect to a Dell 5 PDA to run "XCSoar" software. The Dell runs Android version 2.2.2. It works very nicely.
However the Dell is getting old and I am investigating replacing it with a new device. What I have discovered is that the newer Android versions don't support "USB Debugging" and I need to use OpenAccessory instead. My problem is that it seems my ioio card is too old to support OpenAccessory. I am not sure exactly what version my hardware and bios are, but the newest application firmware that I can install with the IOIOManager application is App-IOIO0300.ioioapp. (I can install Blink V1 and the LED starts blinking. Then I try and install successively older versions of the Application Firmware and only when I get back to this version does it load the firmware and stop led from blinking). I think it comes down to these two questions: Can my ioio V1 board be made to support "Openaccessory"? Do I have to get hold of a programmer device or another IOIO card to upgrade the BIOS in order to achieve this? Thanks Ian -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
