After reset these registers have unknown values. This might cause problems when evaluating SMMU_GFSR and/or SMMU_CB_FSR in handlers for combined interrupts.
Signed-off-by: Andreas Herrmann <[email protected]> --- drivers/iommu/arm-smmu.c | 31 ++++++++++++++++++++----------- 1 file changed, 20 insertions(+), 11 deletions(-) diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c index 579b6f8..b632bcd 100644 --- a/drivers/iommu/arm-smmu.c +++ b/drivers/iommu/arm-smmu.c @@ -1562,9 +1562,13 @@ static struct iommu_ops arm_smmu_ops = { static void arm_smmu_device_reset(struct arm_smmu_device *smmu) { void __iomem *gr0_base = ARM_SMMU_GR0(smmu); - void __iomem *sctlr_base = ARM_SMMU_CB_BASE(smmu) + ARM_SMMU_CB_SCTLR; + void __iomem *cb_base; int i = 0; - u32 scr0 = readl_relaxed(gr0_base + ARM_SMMU_GR0_sCR0); + u32 reg; + + /* clear global FSR */ + reg = readl_relaxed(gr0_base + ARM_SMMU_GR0_sGFSR); + writel(reg, gr0_base + ARM_SMMU_GR0_sGFSR); /* Mark all SMRn as invalid and all S2CRn as bypass */ for (i = 0; i < smmu->num_mapping_groups; ++i) { @@ -1572,33 +1576,38 @@ static void arm_smmu_device_reset(struct arm_smmu_device *smmu) writel_relaxed(S2CR_TYPE_BYPASS, gr0_base + ARM_SMMU_GR0_S2CR(i)); } - /* Make sure all context banks are disabled */ - for (i = 0; i < smmu->num_context_banks; ++i) - writel_relaxed(0, sctlr_base + ARM_SMMU_CB(smmu, i)); + /* Make sure all context banks are disabled and clear CB_FSR */ + for (i = 0; i < smmu->num_context_banks; ++i) { + cb_base = ARM_SMMU_CB_BASE(smmu) + ARM_SMMU_CB(smmu, i); + writel_relaxed(0, cb_base + ARM_SMMU_CB_SCTLR); + writel_relaxed(FSR_FAULT, cb_base + ARM_SMMU_CB_FSR); + } /* Invalidate the TLB, just in case */ writel_relaxed(0, gr0_base + ARM_SMMU_GR0_STLBIALL); writel_relaxed(0, gr0_base + ARM_SMMU_GR0_TLBIALLH); writel_relaxed(0, gr0_base + ARM_SMMU_GR0_TLBIALLNSNH); + reg = readl_relaxed(gr0_base + ARM_SMMU_GR0_sCR0); + /* Enable fault reporting */ - scr0 |= (sCR0_GFRE | sCR0_GFIE | sCR0_GCFGFRE | sCR0_GCFGFIE); + reg |= (sCR0_GFRE | sCR0_GFIE | sCR0_GCFGFRE | sCR0_GCFGFIE); /* Disable TLB broadcasting. */ - scr0 |= (sCR0_VMIDPNE | sCR0_PTM); + reg |= (sCR0_VMIDPNE | sCR0_PTM); /* Enable client access, but bypass when no mapping is found */ - scr0 &= ~(sCR0_CLIENTPD | sCR0_USFCFG); + reg &= ~(sCR0_CLIENTPD | sCR0_USFCFG); /* Disable forced broadcasting */ - scr0 &= ~sCR0_FB; + reg &= ~sCR0_FB; /* Don't upgrade barriers */ - scr0 &= ~(sCR0_BSU_MASK << sCR0_BSU_SHIFT); + reg &= ~(sCR0_BSU_MASK << sCR0_BSU_SHIFT); /* Push the button */ arm_smmu_tlb_sync(smmu); - writel(scr0, gr0_base + ARM_SMMU_GR0_sCR0); + writel(reg, gr0_base + ARM_SMMU_GR0_sCR0); } static int arm_smmu_id_size_to_bits(int size) -- 1.7.9.5 _______________________________________________ iommu mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/iommu
