On Wed, Jan 15, 2014 at 09:03:05PM -0700, Alex Williamson wrote: > [cc +Neil] > > On Tue, 2014-01-14 at 12:41 -0500, Anthony DeRobertis wrote: > > I repeatedly get "No irq handler for vector" since upgrading to 3.12. I > > have confirmed it happens in git master as of yesterday morning > > (061f49ec2d722f485237870f04544d8bec15a778). Fixed by disabling VT-d quirk. > > The full dmesg/console log may also prove useful. Thanks, > Agreed, I'd like to see the full dmesg log from both a boot that has VT-D enabled in the bios, and then again with it disabled in the bios. I would also be interested to know if enabling VT-D in the bios, and adding nointremap to the kernel command line reproduces the problem. What I read below indicates:
1) Disabling VT-D in the bios makes it appear disabled to software, but the system still behaves as though its enabled (i.e. symptoms of using the broken hardware are still present) 2) Enabling VT-D in bios, and modifying the kernel to allow it to remain enabled allows allows the system to function without the symptoms of the broken hardware. I'm having trouble getting my head around those two conditions as they seem to contradict each other. Its like the sense of the bios switch is reversed (i.e. setting VT-D enabled in the bios actually disables it, and vice versa). Neil > Alex > > > [please cc me on responses; I'm not subscribed to the list] > > > > DETAILS: > > > > This is on a ASUS Sabertooth X58 board. Ever since upgrading to 3.12, > > I've been flooded with messages like: > > > > Jan 5 19:06:46 Zia kernel: [292039.181501] do_IRQ: 1.76 No irq handler > > for vector (irq -1) > > Jan 5 19:08:26 Zia kernel: [292138.390433] do_IRQ: 2.140 No irq handler > > for vector (irq -1) > > Jan 5 19:40:16 Zia kernel: [294049.535992] do_IRQ: 1.84 No irq handler > > for vector (irq -1) > > Jan 5 23:12:18 Zia kernel: [306774.882154] do_IRQ: 1.227 No irq handler > > for vector (irq -1) > > > > When first booting 3.12, I got the "This system BIOS has enabled > > interrupt remapping on a chipset that contains an erratum making that > > feature unstable. To maintain system stability interrupt remapping is > > being disabled. Please contact your BIOS vendor for an update" message. > > I believe I also got the do_IRQ messages in that configuration, but am > > not completely sure. > > > > After seeing that, I rebooted the machine and turned off VT-d in the > > BIOS. The warning went away after that. However, the do_IRQ messages are > > definitely present in that configuration. > > > > I have found one configuration that stops them. I turned back on VT-d in > > the BIOS, and then disabled the fix > > "iommu/vt-d: add quirk for broken interrupt remapping on 55XX chipsets" > > (03bbcb2e7e292838bb0244f5a7816d194c911d62). > > > > Also, I am running BIOS version 1402 (the latest), released 2012-08-29, > > with the release notes "improve VT-d compatibility issue." The machine > > has been perfectly stable, running pre-3.12 kernels with VT-d enabled > > (though I'm not sure I'm actually really using that feature, as I > > sometimes use KVM, but don't redirect any real hardware to the VMs). > > > > Here is the patch I used to disable the quirk: > > > > diff --git a/drivers/iommu/intel_irq_remapping.c > > b/drivers/iommu/intel_irq_remapping.c > > index bab10b1..a5bf817 100644 > > --- a/drivers/iommu/intel_irq_remapping.c > > +++ b/drivers/iommu/intel_irq_remapping.c > > @@ -530,10 +530,11 @@ static int __init intel_irq_remapping_supported(void) > > "on a chipset that contains an erratum making > > that\n" > > "feature unstable. To maintain system stability\n" > > "interrupt remapping is being disabled. Please\n" > > - "contact your BIOS vendor for an update\n"); > > - add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK); > > + "contact your BIOS vendor for an update\n" > > + "Ignoring and leaving enabled anyway!\n"); > > + /* add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK); > > disable_irq_remap = 1; > > - return 0; > > + return 0; */ > > } > > > > if (!dmar_ir_support()) > > > > > > SYSTEM INFO: > > > > processor : 0 > > vendor_id : GenuineIntel > > cpu family : 6 > > model : 26 > > model name : Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz > > stepping : 5 > > microcode : 0x19 > > cpu MHz : 1600.000 > > cache size : 8192 KB > > physical id : 0 > > siblings : 8 > > core id : 0 > > cpu cores : 4 > > apicid : 0 > > initial apicid : 0 > > fpu : yes > > fpu_exception : yes > > cpuid level : 11 > > wp : yes > > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca > > cmov pat pse36 clflush dts acpi mmx f > > xsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon > > pebs bts rep_good nopl xtopology nonsto > > p_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm > > sse4_1 sse4_2 popcnt lahf_lm ida dth > > erm tpr_shadow vnmi flexpriority ept vpid > > bogomips : 5612.59 > > clflush size : 64 > > cache_alignment : 64 > > address sizes : 36 bits physical, 48 bits virtual > > power management: > > > > ... (repeats through 7) > > > > > > > > > > > > 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port > > (rev 13) > > Subsystem: ASUSTeK Computer Inc. Device 836b > > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > > Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR- > > > > 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express > > Root Port 1 (rev 13) (prog-if 00 [Normal decode]) > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > > Stepping- SERR+ FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast > > >TAbort-SERR-TAbort-Reset- FastB2B- > > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > > Capabilities: > > Kernel driver in use: pcieport > > > > 00:02.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express > > Root Port 2 (rev 13) (prog-if 00 [Normal decode]) > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > > Stepping- SERR+ FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast > > >TAbort-SERR-TAbort-Reset- FastB2B- > > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > > Capabilities: > > Kernel driver in use: pcieport > > > > 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express > > Root Port 3 (rev 13) (prog-if 00 [Normal decode]) > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > > Stepping- SERR+ FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast > > >TAbort-SERR-TAbort-Reset- FastB2B- > > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > > Capabilities: > > Kernel driver in use: pcieport > > > > 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express > > Root Port 7 (rev 13) (prog-if 00 [Normal decode]) > > Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > > Stepping- SERR+ FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast > > >TAbort-SERR-TAbort-Reset- FastB2B- > > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > > Capabilities: > > Kernel driver in use: pcieport > > > > 00:14.0 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub System Management > > Registers (rev 13) (prog-if 00 [8259]) > > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > > Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR- > > Kernel driver in use: i7core_edac > > > > 00:14.1 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub GPIO and Scratch > > Pad Registers (rev 13) (prog-if 00 [8259]) > > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > > Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR- > > > > 00:14.2 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub Control Status > > and RAS Registers (rev 13) (prog-if 00 [8259]) > > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > > Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR- > > > > 00:14.3 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub Throttle > > Registers (rev 13) (prog-if 00 [8259]) > > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > > Stepping- SERR- FastB2B- DisINTx- > > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast > > >TAbort-SERR-TAbort-SERR- > > Kernel driver in use: uhci_hcd > > > > 00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI > > Controller #5 (prog-if 00 [UHCI]) > > Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard > > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > > Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR- > > Kernel driver in use: uhci_hcd > > > > 00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI > > Controller #6 (prog-if 00 [UHCI]) > > Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard > > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > > Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR- > > Kernel driver in use: uhci_hcd > > > > 00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI > > Controller #2 (prog-if 20 [EHCI]) > > Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > > Stepping- SERR+ FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR- > > Kernel driver in use: ehci-pci > > > > 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio > > Controller > > Subsystem: ASUSTeK Computer Inc. Device 8436 > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > > Stepping- SERR+ FastB2B- DisINTx+ > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR- > > Kernel driver in use: snd_hda_intel > > > > 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express > > Root Port 1 (prog-if 00 [Normal decode]) > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > > Stepping- SERR+ FastB2B- DisINTx+ > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast > > >TAbort-SERR-TAbort-Reset- FastB2B- > > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > > Capabilities: > > Kernel driver in use: pcieport > > > > 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express > > Root Port 5 (prog-if 00 [Normal decode]) > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > > Stepping- SERR+ FastB2B- DisINTx+ > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast > > >TAbort-SERR-TAbort-Reset- FastB2B- > > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > > Capabilities: > > Kernel driver in use: pcieport > > > > 00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI > > Controller #1 (prog-if 00 [UHCI]) > > Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard > > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > > Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR- > > Kernel driver in use: uhci_hcd > > > > 00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI > > Controller #2 (prog-if 00 [UHCI]) > > Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard > > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > > Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR- > > Kernel driver in use: uhci_hcd > > > > 00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI > > Controller #3 (prog-if 00 [UHCI]) > > Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard > > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > > Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR- > > Kernel driver in use: uhci_hcd > > > > 00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI > > Controller #1 (prog-if 20 [EHCI]) > > Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > > Stepping- SERR+ FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR- > > Kernel driver in use: ehci-pci > > > > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) (prog-if 01 > > [Subtractive decode]) > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > > Stepping- SERR+ FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast > > >TAbort-SERR-TAbort-Reset- FastB2B- > > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > > Capabilities: > > > > 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface > > Controller > > Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > > Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-SERR- > > Kernel driver in use: lpc_ich > > > > 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI > > Controller (prog-if 01 [AHCI 1.0]) > > Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > > Stepping- SERR- FastB2B- DisINTx+ > > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR- > > Kernel driver in use: ahci > > > > 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller > > Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard > > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > > Stepping- SERR+ FastB2B- DisINTx- > > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium > > >TAbort-SERR-TAbort-SERR- > > Kernel driver in use: ahci > > > > 02:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller > > (rev 04) (prog-if 30 [XHCI]) > > Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > > Stepping- SERR+ FastB2B- DisINTx+ > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR- > > Kernel driver in use: xhci_hcd > > > > 03:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT > > 440] (rev a1) (prog-if 00 [VGA controller]) > > Subsystem: ASUSTeK Computer Inc. Device 83b7 > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > > Stepping- SERR+ FastB2B- DisINTx+ > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR- > > Kernel driver in use: nouveau > > > > 03:00.1 Audio device: NVIDIA Corporation GF108 High Definition Audio > > Controller (rev a1) > > Subsystem: ASUSTeK Computer Inc. Device 83b7 > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > > Stepping- SERR+ FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR- > > Kernel driver in use: snd_hda_intel > > > > 05:00.0 SATA controller: JMicron Technology Corp. JMB362 SATA Controller > > (rev 10) (prog-if 01 [AHCI 1.0]) > > Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > > Stepping- SERR+ FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR- > > Kernel driver in use: ahci > > > > 07:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > > RTL-8110SC/8169SC Gigabit Ethernet (rev 10) > > Subsystem: ASUSTeK Computer Inc. Device 820d > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > > Stepping- SERR+ FastB2B- DisINTx- > > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR- > > Kernel driver in use: r8169 > > > > 07:02.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire > > II(M)] IEEE 1394 OHCI Controller (rev c0) (prog-if 10 [OHCI]) > > Subsystem: ASUSTeK Computer Inc. Motherboard > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > > Stepping- SERR+ FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-SERR- > > Kernel driver in use: firewire_ohci > > > > ff:00.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath > > Architecture Generic Non-Core Registers (rev 05) > > Subsystem: Intel Corporation Device 8086 > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > > Stepping- SERR- FastB2B- DisINTx- > > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast > > >TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR- > > > > > > > > > > > > Handle 0x0000, DMI type 0, 24 bytes > > BIOS Information > > Vendor: American Megatrends Inc. > > Version: 1402 > > Release Date: 08/09/2012 > > Address: 0xF0000 > > Runtime Size: 64 kB > > ROM Size: 2048 kB > > Characteristics: > > ISA is supported > > PCI is supported > > PNP is supported > > APM is supported > > BIOS is upgradeable > > BIOS shadowing is allowed > > ESCD support is available > > Boot from CD is supported > > Selectable boot is supported > > BIOS ROM is socketed > > EDD is supported > > 5.25"/1.2 MB floppy services are supported (int 13h) > > 3.5"/720 kB floppy services are supported (int 13h) > > 3.5"/2.88 MB floppy services are supported (int 13h) > > Print screen service is supported (int 5h) > > 8042 keyboard services are supported (int 9h) > > Serial services are supported (int 14h) > > Printer services are supported (int 17h) > > CGA/mono video services are supported (int 10h) > > ACPI is supported > > USB legacy is supported > > LS-120 boot is supported > > ATAPI Zip drive boot is supported > > BIOS boot specification is supported > > Targeted content distribution is supported > > BIOS Revision: 8.15 > > > > ... > > > > Handle 0x0002, DMI type 2, 15 bytes > > Base Board Information > > Manufacturer: ASUSTeK Computer INC. > > Product Name: SABERTOOTH X58 > > Version: Rev 1.xx > > Serial Number: 112835500000084 > > Asset Tag: To Be Filled By O.E.M. > > Features: > > Board is a hosting board > > Board is replaceable > > Location In Chassis: To Be Filled By O.E.M. > > Chassis Handle: 0x0003 > > Type: Motherboard > > Contained Object Handles: 0 > > > > > > _______________________________________________ > > iommu mailing list > > [email protected] > > https://lists.linuxfoundation.org/mailman/listinfo/iommu > > > > _______________________________________________ iommu mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/iommu
