> -----Original Message-----
> From: Andreas Herrmann [mailto:[email protected]]
> Sent: Tuesday, January 21, 2014 3:58 AM
> To: Will Deacon
> Cc: [email protected]; linux-arm-
> [email protected]; Andreas Herrmann; Sethi Varun-B16395
> Subject: [PATCH v3 02/11] iommu/arm-smmu: Introduce iommu_group notifier
> block
>
>
> At the moment just handle IOMMU_GROUP_NOTIFY_BIND_DRIVER to conditionally
> isolate all master devices for an SMMU.
>
> Depending on DT information each device is put into its own protection
> domain (if possible). For configuration with one or just a few masters
> per SMMU that is easy to achieve.
>
> In case of many devices per SMMU (e.g. MMU-500 with it's distributed
> translation support) isolation of each device might not be possible --
> depending on number of available SMR groups and/or context banks.
>
> Default is that device isolation is contolled per SMMU with SMMU node
> property "arm,smmu-isolate-devices" in a DT. If this property is set for
> an SMMU node, device isolation is performed.
>
> W/o device isolation the driver detects SMMUs but no translation is
> configured (transactions just bypass translation process).
>
> Note that for device isolation dma_base and size are fixed as 0 and
> SZ_128M at the moment. Additional patches will address this restriction
> and allow automatic growth of mapping size.
>
> Cc: Varun Sethi <[email protected]>
> Cc: Andreas Herrmann <[email protected]>
> Signed-off-by: Andreas Herrmann <[email protected]>
> ---
> drivers/iommu/arm-smmu.c | 44
> ++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 44 insertions(+)
>
> Hi Will,
>
> This new patch addresses Varun's comments:
> - use iommu_group notifier instead of bus notifier
> - remove superfluous call to arm_smmu_add_device in
> notifier function
>
> This patch depends on commit "iommu/arm-smmu: add devices attached to the
> SMMU to an IOMMU group" as found in your git tree (e.g. in branch
> iommu/devel or for-joerg/arm-smmu/updates).
>
>
> Andreas
>
> PS: This time with a proper adaption of the notifier function.
>
>
> diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c index
> 0a5649f..da19bd6 100644
> --- a/drivers/iommu/arm-smmu.c
> +++ b/drivers/iommu/arm-smmu.c
> @@ -46,6 +46,7 @@
> #include <linux/amba/bus.h>
>
> #include <asm/pgalloc.h>
> +#include <asm/dma-iommu.h>
>
> /* Driver options */
> #define ARM_SMMU_OPT_ISOLATE_DEVICES (1 << 0)
> @@ -1517,6 +1518,47 @@ static int arm_smmu_domain_has_cap(struct
> iommu_domain *domain,
> return !!(cap & caps);
> }
>
> +static int arm_smmu_group_notifier(struct notifier_block *nb,
> + unsigned long action, void *data)
> +{
> + struct device *dev = data;
> + struct dma_iommu_mapping *mapping;
> + struct arm_smmu_device *smmu;
> + int ret;
> +
> + switch (action) {
> + case IOMMU_GROUP_NOTIFY_BIND_DRIVER:
> +
> + smmu = dev->archdata.iommu;
> + if (!smmu || !(smmu->options & ARM_SMMU_OPT_ISOLATE_DEVICES))
> + break;
[Sethi Varun-B16395] Should this check be really done here? The "Isolate
devices" property would allow us to set up iommu groups. My understanding is
that if we specify the isolate devices property, then each device would have a
separate iommu group otherwise all devices connected to the SMMU would share
the iommu group.
With that logic, we should link the mapping to the iommu group.
-Varun
> +
> + mapping = arm_iommu_create_mapping(&platform_bus_type,
> + 0, SZ_128M, 0);
> + if (IS_ERR(mapping)) {
> + ret = PTR_ERR(mapping);
> + dev_info(dev, "arm_iommu_create_mapping failed\n");
> + break;
> + }
> +
> + ret = arm_iommu_attach_device(dev, mapping);
> + if (ret < 0) {
> + dev_info(dev, "arm_iommu_attach_device failed\n");
> + arm_iommu_release_mapping(mapping);
> + }
> +
> + break;
> + default:
> + break;
> + }
> +
> + return 0;
> +}
> +
> +static struct notifier_block group_nb = {
> + .notifier_call = arm_smmu_group_notifier, };
> +
> static int arm_smmu_add_device(struct device *dev) {
> struct arm_smmu_device *child, *parent, *smmu; @@ -1566,6 +1608,8
> @@ static int arm_smmu_add_device(struct device *dev)
> return PTR_ERR(group);
> }
>
> + iommu_group_register_notifier(group, &group_nb);
> +
> ret = iommu_group_add_device(group, dev);
> iommu_group_put(group);
> dev->archdata.iommu = smmu;
> --
> 1.7.9.5
>
>
_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
