Hello All .... wonder if there has been any movement on this issue .... I'm having a similar issue I'm running an HP dl380 gen 8 with an Emulex OneConnect 10Gb iSCSI (14e4:164c) (rev 11) also known as " Hewlett-Packard Company NC373i Integrated Multifunction Gigabit Server Adapter" 03:00.2 Mass storage controller: Emulex Corporation OneConnect 10Gb iSCSI Initiator (be3) (rev 01)
03:00.3 Mass storage controller: Emulex Corporation OneConnect 10Gb iSCSI Initiator (be3) (rev 01) Seems as soon as the iscsi target is contacted the following messages appear in the log every few seconds .... Sep 24 15:25:30 kernel: [ 78.682675] dmar: DRHD: handling fault status reg 2 Sep 24 15:25:30 kernel: [ 78.699797] dmar: DMAR:[DMA Write] Request device [03:00.2] fault addr ffffc000 Sep 24 15:25:30 kernel: [ 78.699797] DMAR:[fault reason 05] PTE Write access is not set Sep 24 15:25:30 kernel: [ 78.934546] dmar: DRHD: handling fault status reg 102 Sep 24 15:25:30 kernel: [ 78.934549] dmar: DMAR:[DMA Write] Request device [03:00.2] fault addr ffffc000 Sep 24 15:25:30 kernel: [ 78.934549] DMAR:[fault reason 05] PTE Write access is not set Sep 24 15:25:30 kernel: [ 78.935359] dmar: DRHD: handling fault status reg 202 If I pull intel_iommu=on out of the kernel command line the problem goes away. System is running Ubuntu 14.04.1 LTS 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux Looking for help .... I'm not sure where I should be looking next ..... I need SR-IOV for other adapters in the box. I have a system up that I can pull any data from that might be required. Thanks, --> Rob
_______________________________________________ iommu mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/iommu
