On Tue, Jul 7, 2015 at 10:41 AM, Alex Williamson <alex.william...@redhat.com> wrote: > On Tue, 2015-07-07 at 10:15 -0500, Bjorn Helgaas wrote: >> [+cc Alex] >> >> Hi Mark, >> >> On Wed, May 20, 2015 at 08:11:17AM -0400, Mark Hounschell wrote: >> > Most currently available hardware doesn't allow reads but will allow >> > writes on PCIe peer-to-peer transfers. All current AMD chipsets are >> > this way. I'm pretty sure all Intel chipsets are this way also. What >> > happens with reads is they are just dropped with no indication of >> > error other than the data will not be as expected. Supposedly the >> > PCIe spec does not even require any peer-to-peer support. Regular >> > PCI there is no problem and this API could be useful. However I >> > doubt seriously you will find a pure PCI motherboard that has an >> > IOMMU. >> > >> > I don't understand the chipset manufactures reasoning for disabling >> > PCIe peer-to-peer reads. We would like to make PCIe versions of our >> > cards but their application requires peer-to-peer reads and writes. >> > So we cannot develop PCIe versions of the cards. >> >> I'd like to understand this better. Peer-to-peer between two devices >> below the same Root Port should work as long as ACS doesn't prevent >> it. If we find an Intel or AMD IOMMU, I think we configure ACS to >> prevent direct peer-to-peer (see "pci_acs_enable"), but maybe it could >> still be done with the appropriate IOMMU support. And if you boot >> with "iommu=off", we don't do that ACS configuration, so peer-to-peer >> should work. > > The assumption I work from in vfio is that peer-to-peer should be able > to take a path through the IOMMU, that is from one endpoint, up through > to the RC (with ACS enabled), be translated by the IOMMU and directed > back downstream to the specified endpoint. Whether that actually works > for any/all transactions, I can't say, I don't know how to test it. > It'd be interesting to know if this is a false assumption.
That's what I assume as well. >> I suppose the problem is that peer-to-peer doesn't work between >> devices under different Root Ports or even devices under different >> Root Complexes? >> >> PCIe r3.0, sec 6.12.1.1, says Root Ports that support peer-to-peer >> traffic are required to implement ACS P2P Request Redirect, so if a >> Root Port doesn't implement RR, we can assume it doesn't support >> peer-to-peer. But unfortunately the converse is not true: if a Root >> Port implements RR, that does *not* imply that it supports >> peer-to-peer traffic. > > ACS is a much overlooked part of the spec, afaict we can't assume > anything about a root port that doesn't implement ACS, and most of them > don't. I think we can assume a Root Port that does not implement ACS P2P Request Redirect does not support peer-to-peer traffic with other Root Ports, right? That's how I read sec 6.12.1.1. If we're trying to set up a peer-to-peer path between devices under different Root ports, I think it would make sense to check the ACS support somewhere in the pci_map_resource() path and fail if P2P RR is not implemented. _______________________________________________ iommu mailing list iommu@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/iommu
