On 09/20/16 at 02:53pm, Joerg Roedel wrote:
> On Thu, Sep 15, 2016 at 11:03:26PM +0800, Baoquan He wrote:
> > All devices are supposed to reset themselves at device driver initialization
> > stage. At this time if in kdump kernel those on-flight DMA will be stopped
> > because of device reset. It's best time to update the protection domain 
> > info,
> > especially pte_root, to dte entry which the device relates to.
> > 
> > Signed-off-by: Baoquan He <b...@redhat.com>
> > ---
> >  drivers/iommu/amd_iommu.c | 21 +++++++++++++++++++++
> >  1 file changed, 21 insertions(+)
> > 
> > diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
> > index 6c37300..00b64ee 100644
> > --- a/drivers/iommu/amd_iommu.c
> > +++ b/drivers/iommu/amd_iommu.c
> > @@ -2310,6 +2310,10 @@ static dma_addr_t __map_single(struct device *dev,
> >     unsigned int pages;
> >     int prot = 0;
> >     int i;
> > +   struct iommu_dev_data *dev_data = get_dev_data(dev);
> > +   struct protection_domain *domain = get_domain(dev);
> > +   u16 alias = amd_iommu_alias_table[dev_data->devid];
> > +   struct amd_iommu *iommu = amd_iommu_rlookup_table[dev_data->devid];
> >  
> >     pages = iommu_num_pages(paddr, size, PAGE_SIZE);
> >     paddr &= PAGE_MASK;
> > @@ -2319,6 +2323,13 @@ static dma_addr_t __map_single(struct device *dev,
> >             goto out;
> >  
> >     prot = dir2prot(direction);
> > +   if (translation_pre_enabled(iommu) && !dev_data->domain_updated) {
> > +               dev_data->domain_updated = true;
> > +               set_dte_entry(dev_data->devid, domain, 
> > dev_data->ats.enabled);
> > +               if (alias != dev_data->devid)
> > +                       set_dte_entry(alias, domain, dev_data->ats.enabled);
> > +               device_flush_dte(dev_data);
> > +       }
> 
> Hmm, have you tried hooking this into the set_dma_mask call-back? Every
> driver should call it for its device, so that should be a better
> indicator to now map a new domain.

Very earlier you mentioned this, and I tried, but failed. I guess that
is because of the bnx2 NIC resetting problem. Let me try it again. In
theory it should be better. Just sometime people probably don't call
set_dma_mask explicitly, then default dma mask is used. This could be
seen in those simple device. For those complicated device like sata disk
and ethernet NIC, set_dma_mask should be called. So I would like to try
and use set_dma_mask. Thanks for your great suggestion.

Thanks
Baoquan

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Reply via email to