This patch is for 4GB mode, mainly for 4 issues:
1) Fix a 4GB bug:
if the dram base is 0x4000_0000, the dram size is 0xc000_0000.
then the code just meet a corner case because max_pfn is
0x10_0000.
data->enable_4GB = !!(max_pfn > (0xffffffffUL >> PAGE_SHIFT));
It's true at the case above. That is unexpected.
2) In mt2712, there is a new register for the 4GB PA range(0x118)
we should enlarge the max PA range, or the HW will report
error.
The dram range is from 0x1_0000_0000 to 0x1_ffff_ffff in the 4GB
mode, we cut out the bit[32:30] of the SA(Start address) and
EA(End address) into this REG_MMU_VLD_PA_RNG(0x118).
3) In mt2712, the register(0x13c) is extended for 4GB mode.
bit[7:6] indicate the valid PA[32:33]. Thus, we don't mask the
value and print it directly for debug.
4) if 4GB is enabled, the dram PA range is from 0x1_0000_0000 to
0x1_ffff_ffff. Thus, the PA from iova_to_pa should also '|' BIT(32)
Signed-off-by: Honghui Zhang <honghui.zh...@mediatek.com>
Signed-off-by: Yong Wu <yong...@mediatek.com>
---
drivers/iommu/mtk_iommu.c | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index e21de86..4f233e1 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -61,6 +61,8 @@
#define REG_MMU_IVRP_PADDR 0x114
#define F_MMU_IVRP_PA_SET(pa, ext) (((pa) >> 1) | ((!!(ext)) <<
31))
+#define REG_MMU_VLD_PA_RNG 0x118
+#define F_MMU_VLD_PA_RNG(EA, SA) (((EA) << 8) | (SA))
#define REG_MMU_INT_CONTROL0 0x120
#define F_L2_MULIT_HIT_EN BIT(0)
@@ -85,7 +87,6 @@
#define REG_MMU_FAULT_ST1 0x134
#define REG_MMU_FAULT_VA 0x13c
-#define F_MMU_FAULT_VA_MSK 0xfffff000
#define F_MMU_FAULT_VA_WRITE_BIT BIT(1)
#define F_MMU_FAULT_VA_LAYER_BIT BIT(0)
@@ -214,7 +215,6 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
fault_iova = readl_relaxed(data->base + REG_MMU_FAULT_VA);
layer = fault_iova & F_MMU_FAULT_VA_LAYER_BIT;
write = fault_iova & F_MMU_FAULT_VA_WRITE_BIT;
- fault_iova &= F_MMU_FAULT_VA_MSK;
fault_pa = readl_relaxed(data->base + REG_MMU_INVLD_PA);
regval = readl_relaxed(data->base + REG_MMU_INT_ID);
fault_larb = F_MMU0_INT_ID_LARB_ID(regval);
@@ -395,6 +395,7 @@ static phys_addr_t mtk_iommu_iova_to_phys(struct
iommu_domain *domain,
dma_addr_t iova)
{
struct mtk_iommu_domain *dom = to_mtk_domain(domain);
+ struct mtk_iommu_data *data = mtk_iommu_get_m4u_data();
unsigned long flags;
phys_addr_t pa;
@@ -402,6 +403,9 @@ static phys_addr_t mtk_iommu_iova_to_phys(struct
iommu_domain *domain,
pa = dom->iop->iova_to_phys(dom->iop, iova);
spin_unlock_irqrestore(&dom->pgtlock, flags);
+ if (data->enable_4GB)
+ pa |= BIT(32);
+
return pa;
}
@@ -529,6 +533,14 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data
*data)
writel_relaxed(F_MMU_IVRP_PA_SET(data->protect_base, data->enable_4GB),
data->base + REG_MMU_IVRP_PADDR);
+ if (data->enable_4GB && data->m4u_type != M4U_MT8173) {
+ /*
+ * If 4GB mode is enabled, the validate PA range is from
+ * 0x1_0000_0000 to 0x1_ffff_ffff. here record bit[32:30].
+ */
+ regval = F_MMU_VLD_PA_RNG(7, 4);
+ writel_relaxed(regval, data->base + REG_MMU_VLD_PA_RNG);
+ }
writel_relaxed(0, data->base + REG_MMU_DCM_DIS);
/* It's MISC control register whose default value is ok except mt8173.*/
@@ -574,7 +586,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
data->protect_base = ALIGN(virt_to_phys(protect), MTK_PROTECT_PA_ALIGN);
/* Whether the current dram is over 4GB */
- data->enable_4GB = !!(max_pfn > (0xffffffffUL >> PAGE_SHIFT));
+ data->enable_4GB = !!(max_pfn > (BIT(32) >> PAGE_SHIFT));
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
data->base = devm_ioremap_resource(dev, res);
--
1.9.1
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
