qcom,smmu-v2 is an arm,smmu-v2 implementation with specific
clock and power requirements. This smmu core is used with
multiple masters on msm8996, viz. mdss, video, etc.
Add bindings for the same.

Signed-off-by: Vivek Gautam <vivek.gau...@codeaurora.org>
Reviewed-by: Rob Herring <r...@kernel.org>
Reviewed-by: Tomasz Figa <tf...@chromium.org>
---

 - No change since v11.

 .../devicetree/bindings/iommu/arm,smmu.txt         | 42 ++++++++++++++++++++++
 drivers/iommu/arm-smmu.c                           | 14 ++++++++
 2 files changed, 56 insertions(+)

diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.txt 
b/Documentation/devicetree/bindings/iommu/arm,smmu.txt
index 8a6ffce12af5..7c71a6ed465a 100644
--- a/Documentation/devicetree/bindings/iommu/arm,smmu.txt
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu.txt
@@ -17,10 +17,19 @@ conditions.
                         "arm,mmu-401"
                         "arm,mmu-500"
                         "cavium,smmu-v2"
+                        "qcom,<soc>-smmu-v2", "qcom,smmu-v2"
 
                   depending on the particular implementation and/or the
                   version of the architecture implemented.
 
+                  A number of Qcom SoCs use qcom,smmu-v2 version of the IP.
+                  "qcom,<soc>-smmu-v2" represents a soc specific compatible
+                  string that should be present along with the "qcom,smmu-v2"
+                  to facilitate SoC specific clocks/power connections and to
+                  address specific bug fixes.
+                  An example string would be -
+                  "qcom,msm8996-smmu-v2", "qcom,smmu-v2".
+
 - reg           : Base address and size of the SMMU.
 
 - #global-interrupts : The number of global interrupts exposed by the
@@ -71,6 +80,22 @@ conditions.
                   or using stream matching with #iommu-cells = <2>, and
                   may be ignored if present in such cases.
 
+- clock-names:    List of the names of clocks input to the device. The
+                  required list depends on particular implementation and
+                  is as follows:
+                  - for "qcom,smmu-v2":
+                    - "bus": clock required for downstream bus access and
+                             for the smmu ptw,
+                    - "iface": clock required to access smmu's registers
+                               through the TCU's programming interface.
+                  - unspecified for other implementations.
+
+- clocks:         Specifiers for all clocks listed in the clock-names property,
+                  as per generic clock bindings.
+
+- power-domains:  Specifiers for power domains required to be powered on for
+                  the SMMU to operate, as per generic power domain bindings.
+
 ** Deprecated properties:
 
 - mmu-masters (deprecated in favour of the generic "iommus" binding) :
@@ -137,3 +162,20 @@ conditions.
                 iommu-map = <0 &smmu3 0 0x400>;
                 ...
         };
+
+       /* Qcom's arm,smmu-v2 implementation */
+       smmu4: iommu {
+               compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+               reg = <0xd00000 0x10000>;
+
+               #global-interrupts = <1>;
+               interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+                            <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+                            <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
+               #iommu-cells = <1>;
+               power-domains = <&mmcc MDSS_GDSC>;
+
+               clocks = <&mmcc SMMU_MDP_AXI_CLK>,
+                        <&mmcc SMMU_MDP_AHB_CLK>;
+               clock-names = "bus", "iface";
+       };
diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
index 916cde4954d2..a9edb17f09bf 100644
--- a/drivers/iommu/arm-smmu.c
+++ b/drivers/iommu/arm-smmu.c
@@ -119,6 +119,7 @@ enum arm_smmu_implementation {
        GENERIC_SMMU,
        ARM_MMU500,
        CAVIUM_SMMUV2,
+       QCOM_SMMUV2,
 };
 
 struct arm_smmu_s2cr {
@@ -1980,6 +1981,17 @@ ARM_SMMU_MATCH_DATA(arm_mmu401, ARM_SMMU_V1_64K, 
GENERIC_SMMU);
 ARM_SMMU_MATCH_DATA(arm_mmu500, ARM_SMMU_V2, ARM_MMU500);
 ARM_SMMU_MATCH_DATA(cavium_smmuv2, ARM_SMMU_V2, CAVIUM_SMMUV2);
 
+static const char * const qcom_smmuv2_clks[] = {
+       "bus", "iface",
+};
+
+static const struct arm_smmu_match_data qcom_smmuv2 = {
+       .version = ARM_SMMU_V2,
+       .model = QCOM_SMMUV2,
+       .clks = qcom_smmuv2_clks,
+       .num_clks = ARRAY_SIZE(qcom_smmuv2_clks),
+};
+
 static const struct of_device_id arm_smmu_of_match[] = {
        { .compatible = "arm,smmu-v1", .data = &smmu_generic_v1 },
        { .compatible = "arm,smmu-v2", .data = &smmu_generic_v2 },
@@ -1987,6 +1999,7 @@ static const struct of_device_id arm_smmu_of_match[] = {
        { .compatible = "arm,mmu-401", .data = &arm_mmu401 },
        { .compatible = "arm,mmu-500", .data = &arm_mmu500 },
        { .compatible = "cavium,smmu-v2", .data = &cavium_smmuv2 },
+       { .compatible = "qcom,smmu-v2", .data = &qcom_smmuv2 },
        { },
 };
 MODULE_DEVICE_TABLE(of, arm_smmu_of_match);
@@ -2361,6 +2374,7 @@ IOMMU_OF_DECLARE(arm_mmu400, "arm,mmu-400");
 IOMMU_OF_DECLARE(arm_mmu401, "arm,mmu-401");
 IOMMU_OF_DECLARE(arm_mmu500, "arm,mmu-500");
 IOMMU_OF_DECLARE(cavium_smmuv2, "cavium,smmu-v2");
+IOMMU_OF_DECLARE(qcom_smmuv2, "qcom,smmu-v2");
 
 MODULE_DESCRIPTION("IOMMU API for ARM architected SMMU implementations");
 MODULE_AUTHOR("Will Deacon <will.dea...@arm.com>");
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Reply via email to