Hi Robin,
On Fri, Dec 7, 2018 at 2:54 PM Vivek Gautam <vivek.gau...@codeaurora.org> wrote:
>
> Hi Robin,
>
> On Tue, Dec 4, 2018 at 8:51 PM Robin Murphy <robin.mur...@arm.com> wrote:
> >
> > On 04/12/2018 11:01, Vivek Gautam wrote:
> > > Qualcomm SoCs have an additional level of cache called as
> > > System cache, aka. Last level cache (LLC). This cache sits right
> > > before the DDR, and is tightly coupled with the memory controller.
> > > The cache is available to all the clients present in the SoC system.
> > > The clients request their slices from this system cache, make it
> > > active, and can then start using it.
> > > For these clients with smmu, to start using the system cache for
> > > buffers and, related page tables [1], memory attributes need to be
> > > set accordingly.
> > > This change updates the MAIR and TCR configurations with correct
> > > attributes to use this system cache.
> > >
> > > To explain a little about memory attribute requirements here:
> > >
> > > Non-coherent I/O devices can't look-up into inner caches. However,
> > > coherent I/O devices can. But both can allocate in the system cache
> > > based on system policy and configured memory attributes in page
> > > tables.
> > > CPUs can access both inner and outer caches (including system cache,
> > > aka. Last level cache), and can allocate into system cache too
> > > based on memory attributes, and system policy.
> > >
> > > Further looking at memory types, we have following -
> > > a) Normal uncached :- MAIR 0x44, inner non-cacheable,
> > > outer non-cacheable;
> > > b) Normal cached :- MAIR 0xff, inner read write-back non-transient,
> > > outer read write-back non-transient;
> > > attribute setting for coherenet I/O devices.
> > >
> > > and, for non-coherent i/o devices that can allocate in system cache
> > > another type gets added -
> > > c) Normal sys-cached/non-inner-cached :-
> > > MAIR 0xf4, inner non-cacheable,
> > > outer read write-back non-transient
> > >
> > > So, CPU will automatically use the system cache for memory marked as
> > > normal cached. The normal sys-cached is downgraded to normal non-cached
> > > memory for CPUs.
> > > Coherent I/O devices can use system cache by marking the memory as
> > > normal cached.
> > > Non-coherent I/O devices, to use system cache, should mark the memory as
> > > normal sys-cached in page tables.
> > >
> > > This change is a realisation of following changes
> > > from downstream msm-4.9:
> > > iommu: io-pgtable-arm: Support DOMAIN_ATTRIBUTE_USE_UPSTREAM_HINT[2]
> > > iommu: io-pgtable-arm: Implement IOMMU_USE_UPSTREAM_HINT[3]
> > >
> > > [1] https://patchwork.kernel.org/patch/10302791/
> > > [2]
> > > https://source.codeaurora.org/quic/la/kernel/msm-4.9/commit/?h=msm-4.9&id=bf762276796e79ca90014992f4d9da5593fa7d51
> > > [3]
> > > https://source.codeaurora.org/quic/la/kernel/msm-4.9/commit/?h=msm-4.9&id=d4c72c413ea27c43f60825193d4de9cb8ffd9602
> > >
> > > Signed-off-by: Vivek Gautam <vivek.gau...@codeaurora.org>
> > > ---
> > >
> > > Changes since v1:
> > > - Addressed Tomasz's comments for basing the change on
> > > "NO_INNER_CACHE" concept for non-coherent I/O devices
> > > rather than capturing "SYS_CACHE". This is to indicate
> > > clearly the intent of non-coherent I/O devices that
> > > can't access inner caches.
> >
> > That seems backwards to me - there is already a fundamental assumption
> > that non-coherent devices can't access caches. What we're adding here is
> > a weird exception where they *can* use some level of cache despite still
> > being non-coherent overall.
> >
> > In other words, it's not a case of downgrading coherent devices'
> > accesses to bypass inner caches, it's upgrading non-coherent devices'
> > accesses to hit the outer cache. That's certainly the understanding I
> > got from talking with Pratik at Plumbers, and it does appear to fit with
> > your explanation above despite the final conclusion you draw being
> > different.
>
> Thanks for the thorough review of the change.
> Right, I guess it's rather an upgrade for non-coherent devices to use
> an outer cache than a downgrade for coherent devices.
>
> >
> > I do see what Tomasz meant in terms of the TCR attributes, but what we
> > currently do there is a little unintuitive and not at all representative
> > of actual mapping attributes - I'll come back to that inline.
> >
> > > drivers/iommu/arm-smmu.c | 15 +++++++++++++++
> > > drivers/iommu/dma-iommu.c | 3 +++
> > > drivers/iommu/io-pgtable-arm.c | 22 +++++++++++++++++-----
> > > drivers/iommu/io-pgtable.h | 5 +++++
> > > include/linux/iommu.h | 3 +++
> > > 5 files changed, 43 insertions(+), 5 deletions(-)
> >
> > As a minor nit, I'd prefer this as at least two patches to separate the
> > io-pgtable changes and arm-smmu changes - basically I'd expect it to
> > look much the same as the non-strict mode support did.
>
> Sure, will split the patch.
>
> >
> > > diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
> > > index ba18d89d4732..047f7ff95b0d 100644
> > > --- a/drivers/iommu/arm-smmu.c
> > > +++ b/drivers/iommu/arm-smmu.c
> > > @@ -255,6 +255,7 @@ struct arm_smmu_domain {
> > > struct mutex init_mutex; /* Protects smmu
> > > pointer */
> > > spinlock_t cb_lock; /* Serialises ATS1* ops
> > > and TLB syncs */
> > > struct iommu_domain domain;
> > > + bool no_inner_cache;
> >
> > Can we keep all the domain flags together please? In fact, I'd be
> > inclined to implement an options bitmap as we do elsewhere rather than
> > proliferate multiple bools.
>
> Yea, changing this to bitmap makes sense. Will update this.
>
> >
> > > };
> > >
> > > struct arm_smmu_option_prop {
> > > @@ -897,6 +898,9 @@ static int arm_smmu_init_domain_context(struct
> > > iommu_domain *domain,
> > > if (smmu_domain->non_strict)
> > > pgtbl_cfg.quirks |= IO_PGTABLE_QUIRK_NON_STRICT;
> > >
> > > + if (smmu_domain->no_inner_cache)
> > > + pgtbl_cfg.quirks |= IO_PGTABLE_QUIRK_NO_IC;
> >
> > Maybe we need to be a bit cleverer about setting the quirk (and/or
> > allowing the domain attribute to be set), since depending on
> > configuration and hardware support the domain may end up picking a stage
> > 2 or short-descriptor format and thus being rendered unusable.
>
> I don't think I completely get you here.
> But, do you mean that to set such quirks we should first check configurations
> such as the domain's stage, and the format before deciding whether
> we want to set this or not?
>
> >
> > > +
> > > smmu_domain->smmu = smmu;
> > > pgtbl_ops = alloc_io_pgtable_ops(fmt, &pgtbl_cfg, smmu_domain);
> > > if (!pgtbl_ops) {
> > > @@ -1579,6 +1583,9 @@ static int arm_smmu_domain_get_attr(struct
> > > iommu_domain *domain,
> > > case DOMAIN_ATTR_NESTING:
> > > *(int *)data = (smmu_domain->stage ==
> > > ARM_SMMU_DOMAIN_NESTED);
> > > return 0;
> > > + case DOMAIN_ATTR_NO_IC:
> > > + *((int *)data) = smmu_domain->no_inner_cache;
> > > + return 0;
> > > default:
> > > return -ENODEV;
> > > }
> > > @@ -1619,6 +1626,14 @@ static int arm_smmu_domain_set_attr(struct
> > > iommu_domain *domain,
> > > else
> > > smmu_domain->stage = ARM_SMMU_DOMAIN_S1;
> > > break;
> > > + case DOMAIN_ATTR_NO_IC:
> > > + if (smmu_domain->smmu) {
> > > + ret = -EPERM;
> > > + goto out_unlock;
> > > + }
> > > + if (*((int *)data))
> > > + smmu_domain->no_inner_cache = true;
> >
> > This makes the attribute impossible to disable again, even before the
> > domain is initialized - is that intentional? (and if so, why?)
>
> Right. I should add for data = 0 as well. That should help to disable this
> attribute again.
>
> >
> > > + break;
> > > default:
> > > ret = -ENODEV;
> > > }
> > > diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c
> > > index d1b04753b204..87c3d59c4a6c 100644
> > > --- a/drivers/iommu/dma-iommu.c
> > > +++ b/drivers/iommu/dma-iommu.c
> > > @@ -354,6 +354,9 @@ int dma_info_to_prot(enum dma_data_direction dir,
> > > bool coherent,
> > > {
> > > int prot = coherent ? IOMMU_CACHE : 0;
> > >
> > > + if (!coherent && (attrs & DOMAIN_ATTR_NO_IC))
> > > + prot |= IOMMU_NO_IC;
> > > +
> >
> > Erm, that's going to be a hilariously unexpected interpretation of
> > DMA_ATTR_FORCE_CONTIGUOUS...
>
> Right. :)
> I guess i will take your suggestion to have something like
> DOMAIN_ATTR_QCOM_SYSTEM_CACHE.
>
> >
> > I'm not sure it would really makes sense to expose fine-grained controls
> > at the DMA API level anyway, given the main point is to largely abstract
> > away the notion of caches altogether.
>
> But there are DMA devices (such as video) which use DMA mapping APIs only,
> and which are non-coherent-upgraded-to-use-sytem-cache. Such devices
> can't force set IOMMU quirks unless they do iommu_get_domain_for_dev()
> and then set the domain attributes.
> Will that be better way?
Any suggestions here?
>
> >
> > > if (attrs & DMA_ATTR_PRIVILEGED)
> > > prot |= IOMMU_PRIV;
> > >
> > > diff --git a/drivers/iommu/io-pgtable-arm.c
> > > b/drivers/iommu/io-pgtable-arm.c
> > > index 237cacd4a62b..815b86067bcc 100644
> > > --- a/drivers/iommu/io-pgtable-arm.c
> > > +++ b/drivers/iommu/io-pgtable-arm.c
> > > @@ -168,10 +168,12 @@
> > > #define ARM_LPAE_MAIR_ATTR_MASK 0xff
> > > #define ARM_LPAE_MAIR_ATTR_DEVICE 0x04
> > > #define ARM_LPAE_MAIR_ATTR_NC 0x44
> > > +#define ARM_LPAE_MAIR_ATTR_NO_IC 0xf4
> > > #define ARM_LPAE_MAIR_ATTR_WBRWA 0xff
> > > #define ARM_LPAE_MAIR_ATTR_IDX_NC 0
> > > #define ARM_LPAE_MAIR_ATTR_IDX_CACHE 1
> > > #define ARM_LPAE_MAIR_ATTR_IDX_DEV 2
> > > +#define ARM_LPAE_MAIR_ATTR_IDX_NO_IC 3
> > >
> > > /* IOPTE accessors */
> > > #define iopte_deref(pte,d) __va(iopte_to_paddr(pte, d))
> > > @@ -443,6 +445,9 @@ static arm_lpae_iopte arm_lpae_prot_to_pte(struct
> > > arm_lpae_io_pgtable *data,
> > > else if (prot & IOMMU_CACHE)
> > > pte |= (ARM_LPAE_MAIR_ATTR_IDX_CACHE
> > > << ARM_LPAE_PTE_ATTRINDX_SHIFT);
> > > + else if (prot & IOMMU_NO_IC)
> > > + pte |= (ARM_LPAE_MAIR_ATTR_IDX_NO_IC
> > > + << ARM_LPAE_PTE_ATTRINDX_SHIFT);
> > > } else {
> > > pte = ARM_LPAE_PTE_HAP_FAULT;
> > > if (prot & IOMMU_READ)
> > > @@ -780,7 +785,8 @@ arm_64_lpae_alloc_pgtable_s1(struct io_pgtable_cfg
> > > *cfg, void *cookie)
> > > struct arm_lpae_io_pgtable *data;
> > >
> > > if (cfg->quirks & ~(IO_PGTABLE_QUIRK_ARM_NS |
> > > IO_PGTABLE_QUIRK_NO_DMA |
> > > - IO_PGTABLE_QUIRK_NON_STRICT))
> > > + IO_PGTABLE_QUIRK_NON_STRICT |
> > > + IO_PGTABLE_QUIRK_NO_IC))
> > > return NULL;
> > >
> > > data = arm_lpae_alloc_pgtable(cfg);
> > > @@ -788,9 +794,13 @@ arm_64_lpae_alloc_pgtable_s1(struct io_pgtable_cfg
> > > *cfg, void *cookie)
> > > return NULL;
> > >
> > > /* TCR */
> > > - reg = (ARM_LPAE_TCR_SH_IS << ARM_LPAE_TCR_SH0_SHIFT) |
> > > - (ARM_LPAE_TCR_RGN_WBWA << ARM_LPAE_TCR_IRGN0_SHIFT) |
> > > - (ARM_LPAE_TCR_RGN_WBWA << ARM_LPAE_TCR_ORGN0_SHIFT);
> >
> > The subtle assumption here is that if the SMMU is coherent then these
> > are the attributes we actually want to use, but if it's non-coherent
> > then the interconnect should ignore them anyway so it doesn't really
> > matter. Does either of those aspects hold for qcom SoCs?
>
> From the downstream [1] it's clear that default for smmu is set to
> Non-cached access.
> So, I don't think the interconnect helps us. OR, possibly we are just
> forcing these
> mappings be uncached.
>
> >
> > TBH if we're going to touch the TCR attributes at all then we should
> > probably correct that sloppiness first - there's an occasional argument
> > for using non-cacheable pagetables even on a coherent SMMU if reducing
> > snoop traffic/latency on walks outweighs the cost of cache maintenance
> > on PTE updates, but anyone thinking they can get that by overriding
> > dma-coherent silently gets the worst of both worlds thanks to this
> > current TCR value.
>
> So, what do you suggest?
> This is something that's smmu's implementation specific detail, not something
> that's going to vary from one domain to another? Isn't that right?
> So, in that case additional dt property can help setting a quirk?
I have a change that adds "arm,smmu-pgtable-non-coherent" option
and based on that adds a quick IO_PGTABLE_QUIRK_NON_COHERENT.
But before that I would like to check if we can make use of
IO_PGTABLE_QUIRK_NO_DMA?
In present design though we don't force page table mappings to be
non-coherent based on this quirk. Do we just rely on the interconnect, as you
said earlier, for non-coherent SMMU?
Anyone who wants to just force smmu's page table to be non-coherent
can use IO_PGTABLE_QUIRK_NON_COHERENT when not declaring
the SMMU as dma-coherent.
[snip]
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
