Hi Christoph,
I have found a small workaround. If I add 'mem=3500M' to the boot
arguments then it detects the SATA hard disk and boots without any problems.
X5000> setenv bootargs root=/dev/sda2 console=ttyS0,115200 mem=3500M
Cheers,
Christian
On 19 January 2019 at 12:40PM, Christian Zigotzky wrote:
Hi Christoph,
I bought a USB null modem RS-232 serial cable today so I was able to
get some SATA error messages.
Error messages:
[ 13.468538] fsl-sata ffe220000.sata: Sata FSL Platform/CSB Driver init
[ 13.475106] fsl-sata ffe220000.sata: failed to start port 0
(errno=-12)
[ 13.481736] fsl-sata ffe221000.sata: Sata FSL Platform/CSB Driver init
[ 13.488267] fsl-sata ffe221000.sata: failed to start port 0
(errno=-12)
---
errno=-12 = Out of memory
Please find attached the complete serial log.
Cheers,
Christian
On 18 January 2019 at 4:06PM, Christian Zigotzky wrote:
Hello Christoph,
I was able to compile 257002094bc5935dd63207a380d9698ab81f0775 from
your Git powerpc-dma.6-debug today.
Unfortunately I don't see any error messages (kernel ring buffer) and
I don't have a RS232 serial null modem cable to get them.
Cheers,
Christian
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
