Hi Marc, Thank you for the work on that!
On 3/28/19 7:01 PM, Marc Gonzalez wrote: > Initialize PCIE20_PARF_BDF_TRANSLATE_N for ops_2_3_2. > > Signed-off-by: Marc Gonzalez <[email protected]> > --- > drivers/pci/controller/dwc/pcie-qcom.c | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/drivers/pci/controller/dwc/pcie-qcom.c > b/drivers/pci/controller/dwc/pcie-qcom.c > index 0ed235d560e3..5e5522a427b8 100644 > --- a/drivers/pci/controller/dwc/pcie-qcom.c > +++ b/drivers/pci/controller/dwc/pcie-qcom.c > @@ -54,6 +54,7 @@ > #define PCIE20_PARF_LTSSM 0x1B0 > #define PCIE20_PARF_SID_OFFSET 0x234 > #define PCIE20_PARF_BDF_TRANSLATE_CFG 0x24C > +#define PCIE20_PARF_BDF_TRANSLATE_N 0x250 > > #define PCIE20_ELBI_SYS_CTRL 0x04 > #define PCIE20_ELBI_SYS_CTRL_LT_ENABLE BIT(0) > @@ -602,6 +603,9 @@ static int qcom_pcie_init_2_3_2(struct qcom_pcie *pcie) > val |= BIT(31); > writel(val, pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2); > > + val = PCI_DEVID(1, 0); > + writel(val, pcie->parf + PCIE20_PARF_BDF_TRANSLATE_N); I wonder, shouldn't this register manipulation happen in common code e.g. pcie-designware-host.c and of course the manipulation should be conditional because not all platforms might have iommu. Also, could we have more generic iommu-map description like the one for sdm845 at [1] ? -- regards, Stan _______________________________________________ iommu mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/iommu
