On Mon, 2019-07-15 at 10:51 +0100, Will Deacon wrote:
> On Sun, Jul 14, 2019 at 12:41:20PM +0800, Yong Wu wrote:
> > On Thu, 2019-07-11 at 13:31 +0100, Will Deacon wrote:
> > > This looks like the right sort of idea. Basically, I was thinking that you
> > > can use the oas in conjunction with the quirk to specify whether or not
> > > your two magic bits should be set. You could also then cap the oas using
> > > the size of phys_addr_t to deal with my other comment.
> > >
> > > Finally, I was hoping you could drop the |= BIT_ULL(32) and the &=
> > > ~BIT_ULL(32) bits of the mtk driver if the pgtable code now accepts higher
> > > addresses. Did that not work out?
> >
> > After the current patch, the pgtable has accepted the higher address.
> > the " |= BIT_ULL(32)" and "& = ~ BIT_ULL(32)" is for a special case(we
> > call it 4GB mode).
> >
> > Now MediaTek IOMMU support 2 kind memory:
> > 1) normal case: PA is 0x4000_0000 - 0x3_ffff_ffff. the PA won't be
> > remapped. mt8183 and the non-4GB mode of mt8173/mt2712 use this mode.
> >
> > 2) 4GB Mode: PA is 0x4000_0000 - 0x1_3fff_ffff. But the PA will remapped
> > to 0x1_0000_0000 to 0x1_ffff_ffff. This is for the 4GB mode of
> > mt8173/mt2712. This case is so special that we should change the PA
> > manually(add bit32).
> > (mt2712 and mt8173 have both mode: 4GB and non-4GB.)
> >
> > If we try to use oas and our quirk to cover this two case. Then I can
> > use "oas == 33" only for this 4GB mode. and "oas == 34" for the normal
> > case even though the PA mayn't reach 34bit. Also I should add some
> > "workaround" for the 4GB mode(oas==33).
> >
> > I copy the new patch in the mail below(have dropped the "|= BIT_ULL(32)"
> > and the "&= ~BIT_ULL(32)) in mtk iommu". please help have a look if it
> > is ok.
> > (another thing: Current the PA can support over 4GB. So the quirk name
> > "MTK_4GB" looks not suitable, I used a new patch rename to "MTK_EXT").
>
> Makes sense, thanks. One comment below.
>
> > @@ -205,7 +216,20 @@ static phys_addr_t iopte_to_paddr(arm_v7s_iopte
> > pte, int lvl,
> > else
> > mask = ARM_V7S_LVL_MASK(lvl);
> >
> > - return pte & mask;
> > + paddr = pte & mask;
> > + if (IS_ENABLED(CONFIG_PHYS_ADDR_T_64BIT) &&
> > + (cfg->quirks & IO_PGTABLE_QUIRK_ARM_MTK_EXT)) {
> > + /*
> > + * Workaround for MTK 4GB Mode:
> > + * Add BIT32 only when PA < 0x4000_0000.
> > + */
> > + if ((cfg->oas == 33 && paddr < 0x40000000UL) ||
> > + (cfg->oas > 33 && (pte & ARM_V7S_ATTR_MTK_PA_BIT32)))
> > + paddr |= BIT_ULL(32);
> > + if (pte & ARM_V7S_ATTR_MTK_PA_BIT33)
> > + paddr |= BIT_ULL(33);
> > + }
> > + return paddr;
> > }
> >
> > static arm_v7s_iopte *iopte_deref(arm_v7s_iopte pte, int lvl,
> > @@ -326,9 +350,6 @@ static arm_v7s_iopte arm_v7s_prot_to_pte(int prot,
> > int lvl,
> > if (lvl == 1 && (cfg->quirks & IO_PGTABLE_QUIRK_ARM_NS))
> > pte |= ARM_V7S_ATTR_NS_SECTION;
> >
> > - if (cfg->quirks & IO_PGTABLE_QUIRK_ARM_MTK_EXT)
> > - pte |= ARM_V7S_ATTR_MTK_4GB;
> > -
> > return pte;
> > }
> >
> > @@ -742,7 +763,9 @@ static struct io_pgtable
> > *arm_v7s_alloc_pgtable(struct io_pgtable_cfg *cfg,
> > {
> > struct arm_v7s_io_pgtable *data;
> >
> > - if (cfg->ias > ARM_V7S_ADDR_BITS || cfg->oas > ARM_V7S_ADDR_BITS)
> > + if (cfg->ias > ARM_V7S_ADDR_BITS ||
> > + (cfg->oas > ARM_V7S_ADDR_BITS &&
> > + !(cfg->quirks & IO_PGTABLE_QUIRK_ARM_MTK_EXT)))
> > return NULL;
>
> I think you can rework this to do something like:
>
> if (cfg->ias > ARM_V7S_ADDR_BITS)
> return NULL;
>
> if (cfg->quirks & IO_PGTABLE_QUIRK_ARM_MTK_EXT) {
> if (!IS_ENABLED(CONFIG_PHYS_ADDR_T_64BIT))
> cfg->oas = min(cfg->oas, ARM_V7S_ADDR_BITS);
> else if (cfg->oas > 34)
> return NULL;
> } else if (cfg->oas > ARM_V7S_ADDR_BITS) {
> return NULL;
> }
>
> so that we clamp the oas when phys_addr_t is 32-bit for you. That should
> allow you to remove lots of the checking from iopte_to_paddr() too if you
> check against oas in the map() function.
>
> Does that make sense?
Of course I'm ok for this. I'm only afraid that this function has
already 3 checking "if (x) return NULL", Here we add a new one and so
many lines... Maybe the user should guarantee the right value of oas.
How about move it into mtk_iommu.c?
About the checking of iopte_to_paddr, I can not remove them. I know it
may be a bit special and not readable. Hmm, I guess I should use a MACRO
instead of the hard code 33 for the special 4GB mode case.
Then the patch would be like:
//=========================
static phys_addr_t iopte_to_paddr(arm_v7s_iopte pte, int lvl,
struct io_pgtable_cfg *cfg)
{
arm_v7s_iopte mask;
+ phys_addr_t paddr;
if (ARM_V7S_PTE_IS_TABLE(pte, lvl))
mask = ARM_V7S_TABLE_MASK;
@@ -205,7 +216,21 @@ static phys_addr_t iopte_to_paddr(arm_v7s_iopte
pte, int lvl,
else
mask = ARM_V7S_LVL_MASK(lvl);
- return pte & mask;
+ paddr = pte & mask;
+ if (cfg->oas > ARM_V7S_ADDR_BITS &&
+ (cfg->quirks & IO_PGTABLE_QUIRK_ARM_MTK_EXT)) {
+ /*
+ * Workaround for MTK 4GB Mode:
+ * Add BIT32 only when PA < 0x4000_0000.
+ */
+ if (cfg->oas == ARM_V7S_MTK_4GB_OAS && paddr < 0x40000000UL)
+ paddr |= BIT_ULL(32);
+ else if (pte & ARM_V7S_ATTR_MTK_PA_BIT32)
+ paddr |= BIT_ULL(32);
+ if (pte & ARM_V7S_ATTR_MTK_PA_BIT33)
+ paddr |= BIT_ULL(33);
+ }
+ return paddr;
}
@@ -741,8 +763,10 @@ static struct io_pgtable
*arm_v7s_alloc_pgtable(struct io_pgtable_cfg *cfg,
void *cookie)
{
struct arm_v7s_io_pgtable *data;
-
- if (cfg->ias > ARM_V7S_ADDR_BITS || cfg->oas > ARM_V7S_ADDR_BITS)
+
+ if (cfg->ias > ARM_V7S_ADDR_BITS ||
+ (cfg->oas > ARM_V7S_ADDR_BITS &&
+ !(cfg->quirks & IO_PGTABLE_QUIRK_ARM_MTK_EXT)))
return NULL;
if (cfg->quirks & ~(IO_PGTABLE_QUIRK_ARM_NS |
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 85e71fb..4efc5a3 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -271,16 +271,20 @@ static int mtk_iommu_domain_finalise(struct
mtk_iommu_domain *dom)
dom->cfg = (struct io_pgtable_cfg) {
.quirks = IO_PGTABLE_QUIRK_ARM_NS |
IO_PGTABLE_QUIRK_NO_PERMS |
- IO_PGTABLE_QUIRK_TLBI_ON_MAP,
+ IO_PGTABLE_QUIRK_TLBI_ON_MAP |
+ IO_PGTABLE_QUIRK_ARM_MTK_EXT,
.pgsize_bitmap = mtk_iommu_ops.pgsize_bitmap,
.ias = 32,
- .oas = 32,
.tlb = &mtk_iommu_gather_ops,
.iommu_dev = data->dev,
};
- if (data->enable_4GB)
- dom->cfg.quirks |= IO_PGTABLE_QUIRK_ARM_MTK_EXT;
+ if (!IS_ENABLED(CONFIG_PHYS_ADDR_T_64BIT))
+ dom->cfg.oas = 32;
+ else if (data->enable_4GB)
+ dom->cfg.oas = ARM_V7S_MTK_4GB_OAS;
+ else
+ dom->cfg.oas = 34;
--- a/include/linux/io-pgtable.h
+++ b/include/linux/io-pgtable.h
@@ -117,6 +116,8 @@ struct io_pgtable_cfg {
};
};
+#define ARM_V7S_MTK_4GB_OAS 33
+
/**
* struct io_pgtable_ops - Page table manipulation API for IOMMU
drivers.
*
=====================================
>
> Will
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
